Author Topic: PETTER - PAZ1 - New project  (Read 68372 times)

sirpedrosa

  • Hero Member
  • *****
  • Posts: 891
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: PETTER - PAZ1 - New project - Kart almost done
« Reply #195 on: September 28, 2024, 08:46:21 PM »
Gentles

A few more work at the kart to the geny.

Things are coming up.

A few pic to the show.

Remember when I start prototyping this kart? see here https://listerengine.com/smf/index.php?topic=8333.msg104744#msg104744

Put engine on to see how things are sorting.

Featuring a mufller to be more silent.

Cheers
VP

Ps: Ill put later pics of detail of front axcel spindle. Take a look of it tilting limit.

PS2: PLEASE ADEV, TURN OFF THE AUTO ROTATING OF PICS, SO WE CAN SEE THINGS WRIGHT.
« Last Edit: September 28, 2024, 08:50:16 PM by sirpedrosa »
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 891
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: PETTER - PAZ1 - New project - spindle detail
« Reply #196 on: October 06, 2024, 10:09:51 PM »
Gentles

Here are the detail of the front axis spindle.

A 16mm of core inside a rubber hose of OD 24mm.

Cheers
VP
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 891
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: PETTER - PAZ1 - New project - handle bar, belts and test run
« Reply #197 on: December 07, 2024, 06:09:01 PM »
Gentles,

Had been a while this thread is idling but not halted.

Pulleys in place and aligned, and belts stretch.

Handle bar is also in place too.

Gave it a run to see the voltage and it is at 250ish.

Needs more tweaking and got to sort out the muffler in order to silent it.

A few pics to showoff.

Cheers
VP
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).