Author Topic: 1925 Lister 2T and Generator  (Read 4536 times)

ajaffa1

  • Hero Member
  • *****
  • Posts: 1789
    • View Profile
Re: 1925 Lister 2T and Generator
« Reply #60 on: June 16, 2024, 11:34:04 AM »
Hi Bent Trigger, yes there is a lot of internal dirt shown in your photos. There is a product called flushing oil which will remove most of it without a complete disassembly. Get the unit running and then drain out the oil. Replace the oil with flushing oil, run the engine up to normal working temperature (probably around a half hour run but follow the instructions on the tin), drain out the flushing oil and replace with regular oil. Do not throw out the flushing oil, let it settle and it can be reused.

Bob

Bent Trigger

  • My Cat Says Arear!!
  • Newbie
  • *
  • Posts: 47
  • I can't lay off the Husqvarna!
    • View Profile
Re: 1925 Lister 2T and Generator
« Reply #61 on: July 07, 2024, 12:54:02 PM »
Took it completely down for a good cleaning and inspection and a fresh epoxy coat. Hope to start reassembly soon. Anyone know where to get gaskets or do u have to maked my own?
https://photos.app.goo.gl/q6CsZkDmR9h4va5ZA
Multiple Husqvarna
Multiple Generators
Multiple Projects
       Manchu
Keep Up The Fire!!

Bent Trigger

  • My Cat Says Arear!!
  • Newbie
  • *
  • Posts: 47
  • I can't lay off the Husqvarna!
    • View Profile
Re: 1925 Lister 2T and Generator
« Reply #62 on: July 07, 2024, 11:29:04 PM »
Multiple Husqvarna
Multiple Generators
Multiple Projects
       Manchu
Keep Up The Fire!!