After running out of Argon and getting a new bottle I finished up the engine mount while fighting the wind blowing my shield gas. Removed the Generator dog house and will pull wires up into a control box with the exception of the bridge rectifier. The control box will have a contactor, breaker and voltage monitor relay along with Current, volts, Hertz, and hour meter. The voltage monitor relay will pick up the contactor when the generator voltage is within a good range (probably 210-250 volts) and drop out outside of this range. This is to drop out the generator on a shut down with a load to save the charge on the field. Bottom of the box will have a 30 amp twist lock plug to plug my 8 gauge SO cord in to the barn.