Puppeteer

Author Topic: Resurrection of a Deutz MAH 914, 1952? Lets see!  (Read 40150 times)

sirpedrosa

  • Hero Member
  • *****
  • Posts: 888
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: Resurrection of a Deutz MAH 914, 1952? Ruturn lines done!
« Reply #285 on: June 04, 2024, 12:25:49 AM »
Gentles, Bob

Voilá, return lines are done.

And the Mom's Bernard is also on top of its kart - that I saved at village after Dad passed away.

A few pics to show off.

Cheers
VP
« Last Edit: June 04, 2024, 12:27:54 AM by sirpedrosa »
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 888
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: Resurrection of a Deutz MAH 914, 1952? The German is ready to rally
« Reply #286 on: June 09, 2024, 07:03:06 PM »
Gentles,

The German is ready, on the kart, and finalized.

Last bit was to fix the exaust pipe to the frame. Gave it a run and its low noise becuse the pipe is the 2inch original.

Make a video but something happen, that it doesn't show image.

A few pics to showoff.

Cheers.
VP
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

dax021

  • Full Member
  • ***
  • Posts: 239
    • View Profile
Re: Resurrection of a Deutz MAH 914, 1952? Lets see!
« Reply #287 on: June 09, 2024, 08:54:58 PM »
That looks stunning VP.  You deserve to show it off.  Well worth all the effort and expense.

ajaffa1

  • Hero Member
  • *****
  • Posts: 1791
    • View Profile
Re: Resurrection of a Deutz MAH 914, 1952? Lets see!
« Reply #288 on: June 10, 2024, 08:50:35 AM »
Well done VP, a beautiful restoration and the non original fuel tank looks like it grew there. I particularly like the homemade trolley. Looking forward to seeing what you decide to restore next.

Bob

cobbadog

  • Hero Member
  • *****
  • Posts: 1069
    • View Profile
Re: Resurrection of a Deutz MAH 914, 1952? Lets see!
« Reply #289 on: June 10, 2024, 12:10:20 PM »
What a lovely restoration and story to follow from the beginning to end. Very high standards of workmansip really shows in the finished product. Thank you for sharing it with us.
Coopernook - the centre of our Universe.

sirpedrosa

  • Hero Member
  • *****
  • Posts: 888
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: Resurrection of a Deutz MAH 914, 1952? Give a run to all stationary
« Reply #290 on: June 14, 2024, 12:20:33 AM »
Gentles,

Many thanks to all members, and enthusiasts for kind words.

Today was a county holiday here, and so I give a run to all stationary (well, the Bernard is not a pure stationary, and the Volvo Penta stayed cold, but you all understand).

The Lister still being the swiss clock, off course, and both Petters needed to be primed, and the German is ready to roll.

And... its time to restore a 2 stroke 50cc motorcycle, from 1990, of my passed away oncle, that I buyed from my cousin, just to stay busy.  ;D ;D ;D

A few pics to showoff.

Cheers
VP

PS: Stef its not a Zündap, because its too expensive, but this one is also an icon from the old days.
« Last Edit: June 14, 2024, 12:23:08 AM by sirpedrosa »
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

cobbadog

  • Hero Member
  • *****
  • Posts: 1069
    • View Profile
Re: Resurrection of a Deutz MAH 914, 1952? Lets see!
« Reply #291 on: June 16, 2024, 12:00:24 PM »
WOW, look forward to seeing and learning more about the bike. What brand is it. Looks a big engine for 50cc.
Coopernook - the centre of our Universe.

sirpedrosa

  • Hero Member
  • *****
  • Posts: 888
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: Resurrection of a Deutz MAH 914, 1952? Lets see! - Start new thread
« Reply #292 on: June 16, 2024, 05:54:30 PM »
Gentles, Cobba

Started a new thread about the ciclemotor here:https://listerengine.com/smf/index.php?topic=9904.msg112456#msg112456.

Cobba, the engine is not that big. There are a few types: this one is 4 speed with small carburetor, and cylinder fin cooled, there is an other with air ventilated and smaller cylinder.

The 2 speed has same head.

There is a bigger fin for 5 speed and 6 speed with bigger carburator, and also water cooled.

Lets see this one, how it ends up.

Cheers
VP
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 888
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Gentles

Last July 12,13, and 14 showed the German at my village in the XXX Feiriarte - craft and economic activity fair.

 - Of course the only one showing an engine is me! (Come on... by the Mercedes Benz stand? - its a must!)

Here are some pics to show. This year I forgot to take pics and vids (Im getting old). But for shure one pic is mandatory - arriving at entrance of the fair. (Im waiting for pics of otheres to showoff)

I had the honor to have lunch with the former owner of the engine - and hers 2 daughters. She's 92. The daughters were overwhelmed with the restauration job done.

Later Ill post pics taken by daughters.

Remeber this is a small village, therefore things are at scale.


Cheers
VP
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).