Author Topic: Forges DeGuilly....Horizontal Boring Machine  (Read 378 times)

dkmc

  • Full Member
  • ***
  • Posts: 227
    • View Profile
Forges DeGuilly....Horizontal Boring Machine
« on: July 22, 2022, 12:21:36 PM »
Well, seven years later.....and some effort to un-bury the machine from 'storage table' duty, the FDG is powered up and running. Incentive job was drilling and tapping the end of the crankshaft on a Wis-con V4.....
Heidenhain DRO install is next.....not sure when.....but next. Along with some other general maintenance and adjustments.

Machinist, fabricator, designer, daydreamer.... mostly.

mihit

  • Jr. Member
  • **
  • Posts: 86
    • View Profile
Re: Forges DeGuilly....Horizontal Boring Machine
« Reply #1 on: July 23, 2022, 07:45:35 PM »
Wow, that's a nice bit of iron! Looks like a fair whack of travel in all directions. That'd come in handy!