Author Topic: Cam gear CS 6  (Read 367 times)

Owenga

  • Newbie
  • *
  • Posts: 14
    • View Profile
Cam gear CS 6
« on: April 27, 2021, 10:22:20 AM »
Hi..
Does any in New Zealand or Australia have a cam gear for a CS, l was going to ďEutalloy the cracks in my cam gear but I would rather replace it.....

Thanks Daryl....

mikenash

  • Hero Member
  • *****
  • Posts: 842
    • View Profile
Re: Cam gear CS 6
« Reply #1 on: May 02, 2021, 01:40:31 AM »
Hey Daryl whereabouts are you?

I have the entire bottom end of a 3/1 sitting in a paddock here.  I don't see why the cam gear would have any more than superficial rust on it.  I would imagine it's the same as a 5/6/1 - maybe worth looking at?

Get back to me if you like?

Cheers, Mike

Owenga

  • Newbie
  • *
  • Posts: 14
    • View Profile
Re: Cam gear CS 6
« Reply #2 on: May 02, 2021, 07:59:51 PM »
Hi Mike..
Yes Iím keen on the gear or complete cam... It would be easy to send it here Iím on Chatham island , let me know a price including freight to Auckland and we can do a deal..
My email... Sladen,engineers@xtra.co.nz

Thanks Daryl....

mikenash

  • Hero Member
  • *****
  • Posts: 842
    • View Profile
Re: Cam gear CS 6
« Reply #3 on: May 06, 2021, 08:22:00 PM »
Hi Daryl

i hadn't realised you were in the Chathams - great spot

i was hoping you were on the mainland somewhere somewhere and could just come and dismantle the old case and help yourself.  I'm currently about 400 Ks away from where the motor is - but next time I'm there, I'll have a look

However do you know about the spares chap in Australia?

https://www.oldtimerengines.com.au/lister-engine-parts/lister-cs/valve-rocker-and-timing-gear/lister-cs-cam-shaft-assembly.html

See link?  Or google oldtimerengines

Really helpful chap.  Has mailed me all sorts of things

Cheers

Owenga

  • Newbie
  • *
  • Posts: 14
    • View Profile
Re: Cam gear CS 6
« Reply #4 on: May 10, 2021, 02:09:59 PM »
Hi .Mike...
Where abouts is the donor engine ? ... I have a few mates on the mainland and Iím going to NZ in the next few months I might be able to get there.... I will look up the Australian contact.....

Thanks heaps...... Daryl..