Author Topic: Petter PAZ1  (Read 419 times)

smiffy3012

  • Newbie
  • *
  • Posts: 2
    • View Profile
Petter PAZ1
« on: February 02, 2021, 11:54:15 AM »
Good morning and thank you for allowing me to join. I am resurrecting an old cement mixer with a PAZ1 engine and I have a couple of questions. My first is the age of engine (I believe 1970's) number 4122472 and secondly I need some information so I can order parts. I'm definitely missing part/s in pic which I think is called an overload stop, but as a retired race motorcycle engineer, I'm am at a loss to a few of the items and could do with someone pointing me in the right direction. A parts list for this section would be helpful.
I have cleaned all lines, changed oil etc and she starts no problem although very smokey, so I imagine rings are an issue although 25 years ago when I got this I poured half a cup of oil into the cylinder to preserve it for this very moment in time as it was a non runner when I got it. Any help would be appreciated. I've downloaded Ians manual so far. Thanks Smiffy (smiffy3012@yahoo.co.uk)

sirpedrosa

  • Hero Member
  • *****
  • Posts: 629
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: Petter PAZ1
« Reply #1 on: February 03, 2021, 12:24:22 AM »
Hi Smif

See if you can get any help from my thread, here: https://listerengine.com/smf/index.php?topic=8333.msg95727#msg95727

BR
VP
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!

smiffy3012

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: Petter PAZ1
« Reply #2 on: February 04, 2021, 08:01:11 PM »
Thank you sirpedrosa very good article. Have made progress now and parts ordered