Author Topic: Bad vibrations  (Read 1314 times)

RichardsSR2

  • Newbie
  • *
  • Posts: 6
    • View Profile
Bad vibrations
« on: May 09, 2020, 05:04:06 PM »
Hello everyone. Just joined. My SR2 sits in my narrowboat in Parbold on the Leeds/Liverpool. It's had work done on the top end and starts well. The problem is it vibrates a lot and being fastened tightly to the chassis it vibrates everything else too. the vibrations even out at certain revs and are more pronounced at others. Is this a characteristic or a fault somewhere. Your opinions will be eagerly received.

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: Bad vibrations
« Reply #1 on: May 09, 2020, 09:34:29 PM »
Hi Richards

How many hours work it has?

Prepare new bigend shells to fit!

BR
VP
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).