Puppeteer

Author Topic: microcogen.info  (Read 631 times)

mobile_bob

  • Administrator
  • Hero Member
  • *****
  • Posts: 2787
    • View Profile
microcogen.info
« on: July 18, 2019, 08:33:01 PM »
has been offline for a few weeks now, i haven't had much time to get it sorted.
today i finally got enough information from simplemachines and hostmonster to get it sorted out again.

i realize the microcogen forums are all but nearly dead, however there is in my opinion information from years ago
that might be of interest to others, so i will keep it going.

we resolved the issue, so it can now be accessed as usual, however i will have to do some upgrades over the next couple
weeks to get it completely done and available for however long there is interest.

not trying to take anything away from this forum,  just wanted to let folks know what happened over there.

back to the political grind

bob g
otherpower.com, microcogen.info, practicalmachinist.com
(useful forums), utterpower.com for all sorts of diy info

glort

  • Hero Member
  • *****
  • Posts: 3056
    • View Profile
Re: microcogen.info
« Reply #1 on: July 18, 2019, 11:05:47 PM »

I did Notice that Bob but figured you'd be doing what you could about it.

There is an incredible amount of info there that is for sure. I wish I could download a copy of the whole site, it would be well worth having.

I have been documenting a couple of things I'm doing which fit the subject of that site more than this so I'll post there as I get something worthwhile.
It would be nice to see it getting going again but I notice so many DIY type forums are far less attended than they used to be, Even the ones I'm not on so it can't just be me keeping people away.  :0)

I go to engine shows and as a person in my Mid 50's, I usually feel like the young kid there.  I wonder if it was the same 30 years ago and this is just a " mature" persons interest or younger people used to like this stuff too back then ?

Thanks for keeping the site(s) going Bob. I am often amazed when I google some idea that there is a discussion about it from 10 years back and my idea was not nearly as original as I deluded myself.  :-[

cobbadog

  • Full Member
  • ***
  • Posts: 243
    • View Profile
Re: microcogen.info
« Reply #2 on: July 19, 2019, 07:39:54 AM »
Cheers for keeping us informed as to what could happen. It would be sad if it is lost as there are still a fair amount of shat going on and great help being offered to those who ask.
I go to many different Forum from tractors, trucks, stationary engines and here of course. One of them, the truck one, only last week notified the users of an upgrade about to happen. He posted a link to the newer version and asked us to try signing in and using it as a test. It worked out well so soon it will be the version to use and the old will be gone.
We hope that all this can be saved and thanks for having it available to us.
Cheers Cobba
Coopernook - the centre of our Universe.

LowGear

  • Casey
  • Hero Member
  • *****
  • Posts: 2059
  • What? My diesel had fries for lunch?
    • View Profile
Re: microcogen.info
« Reply #3 on: July 19, 2019, 05:38:17 PM »
Thanks bob.

NPR Tipper/Dump Truck
Kubota BX 2230
Witte BD Generator
SunnyBoy 6000 + SolarWorld 245

veggie

  • Keep Calm and Start the Lister !
  • Sr. Member
  • ****
  • Posts: 488
    • View Profile
Re: microcogen.info
« Reply #4 on: July 22, 2019, 02:36:15 PM »

Hey Bob, thanks!

Veggie
- 6/1 GM90 Listeroid - Delco 33si Alternator
- Changfa R175 - Lease/Neville Alternator
- Kubota Z482 - 4kw
- JiangDong R165 Air cooled - 2 kw

dieselspanner

  • Hero Member
  • *****
  • Posts: 613
    • View Profile
Re: microcogen.info
« Reply #5 on: July 22, 2019, 04:02:12 PM »
+1

Many thanks Bob

Stef
Tighten 'til it strips, weld nut to chassis, peen stud, adjust with angle grinder.

mike90045

  • Mendocino Metro
  • Hero Member
  • *****
  • Posts: 1413
  • Mmmm BBQ
    • View Profile
    • Mikes Solar PV page
Re: microcogen.info
« Reply #6 on: September 21, 2019, 07:37:12 AM »
Account Suspended
http://www.microcogen.info/cgi-sys/suspendedpage.cgi?
 is what I got tonight, is there a backup of the site on DVD for sale ?  There was some good stuff there, even if it wasnt very active recently.

:(

hwew

  • Newbie
  • *
  • Posts: 40
    • View Profile
Re: microcogen.info
« Reply #7 on: September 21, 2019, 11:29:34 AM »
Itís been reported last night and being looked into.
At times an account will be suspended to secure information from hackers.
It could be something as simple as needing security updates.

Henry
« Last Edit: September 21, 2019, 12:31:34 PM by hwew »

mike90045

  • Mendocino Metro
  • Hero Member
  • *****
  • Posts: 1413
  • Mmmm BBQ
    • View Profile
    • Mikes Solar PV page
Re: microcogen.info
« Reply #8 on: September 25, 2019, 06:35:26 AM »
bummer, this message does not look promising:
This domain is pending renewal or has expired. Please contact the domain provider with questions.

shipo

  • Newbie
  • *
  • Posts: 32
    • View Profile
Re: microcogen.info
« Reply #9 on: September 28, 2019, 02:29:25 AM »

Thanks Bob....please let us know if we can donate, too much valuable info in there...
Changfa 195/10k
Changfa 170R

hwew

  • Newbie
  • *
  • Posts: 40
    • View Profile
Re: microcogen.info
« Reply #10 on: October 02, 2019, 06:31:28 AM »
microcogen.info is back up.

Thanks Bob,