Author Topic: New here :)  (Read 2753 times)

SWE-Timo

  • Newbie
  • *
  • Posts: 6
    • View Profile
New here :)
« on: October 15, 2018, 07:56:45 PM »
Hi. My name Timo from Sweden I just bought a Snipa with a lister Morton which I know. I thing about . Meaning I’m a sailor and not a wooden boat owner with old engines
It’s a lister 1xylinder Hans started air cooled engine . How do I find out what model it is ?

Cheers
/Timo

guest23837

  • Guest
Re: New here :)
« Reply #1 on: October 15, 2018, 09:00:42 PM »
Post a photo and the engine number on this site someone will be able to tell you what you have

SWE-Timo

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: New here :)
« Reply #2 on: October 20, 2018, 04:18:02 PM »
here is the picture .
 thanks for the help

SWE-Timo

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: New here :)
« Reply #3 on: October 20, 2018, 04:25:39 PM »
The engine


guest23837

  • Guest
Re: New here :)
« Reply #4 on: October 20, 2018, 05:00:18 PM »
It's a lister SR1 from I think 1968

SWE-Timo

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: New here :)
« Reply #5 on: October 20, 2018, 05:05:23 PM »
HI and thank you for the immediate response ..

where can i find parts for the engine ?
cheers

guest23837

  • Guest
Re: New here :)
« Reply #6 on: October 20, 2018, 05:19:37 PM »
You can get almost everything you need from the UK or America. You will need well stuffed pockets that are fairly deep. You will also need a manual

http://www.winget.co.uk/document/lister%20petter%20l%20series%20workshop%20manual.pdf

SWE-Timo

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: New here :)
« Reply #7 on: October 20, 2018, 05:48:03 PM »
by " stuffed pockets" do you mean full of money , if so i dont have any £$€ because my sailing boat empties them ..

guest23837

  • Guest
Re: New here :)
« Reply #8 on: October 20, 2018, 07:09:14 PM »
Parts aren't too expensive postage is unless you have a dealer in Sweden

dieselspanner

  • Hero Member
  • *****
  • Posts: 726
    • View Profile
Re: New here :)
« Reply #9 on: October 20, 2018, 09:08:56 PM »
If a boat is a hole in the water you have to fill with money, then a CS Lister is a lump of ferrous metal that'll not only cost you it's weight in gold, you'll buy the bits you can't repair with as much enthusiasm as you shell out for a new suite of berthing lines.

Ask me how I know...........

Cheers
Stef

Tighten 'til it strips, weld nut to chassis, peen stud, adjust with angle grinder.

SWE-Timo

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: New here :)
« Reply #10 on: October 27, 2018, 10:58:03 AM »
I'll be back in the spring time with loads more questions .
Now its winter ( first snow today ) 6 more months to go before the project work starts .
This is the project .
550X190 Oak built in the 50's in Kalmar ( Sweden )

dieselgman

  • Hero Member
  • *****
  • Posts: 3189
    • View Profile
    • Lister Parts
Re: New here :)
« Reply #11 on: October 28, 2018, 12:17:56 AM »
We keep good stocks for nearly ALL Lister engine models made in the past 50 years. SR models are commonplace and well supported.


gary@dieselgen.com


dieselgman
ALL Things Lister/Petter - Americas
Lyons Kansas warehousing and rebuild operations