Author Topic: PETTER - PAZ1 - New project  (Read 56353 times)

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
PETTER - PAZ1 - New project - Gantry legs get primary paint
« Reply #180 on: April 23, 2021, 10:21:06 PM »
Hi Gentles

After a while out, Im back again... just to show crane legs with primary paint.

Stay safe.
VP

PS: manage to do for first time gun painting... not bad for a noob.
« Last Edit: April 23, 2021, 10:24:36 PM by sirpedrosa »
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
PETTER - PAZ1 - New project - tweaking the hilux time belt and IP
« Reply #181 on: April 23, 2021, 11:19:19 PM »
Hi Gentles

My apologies to not share in last post some TLC to my latest acquisition, a Hilux 1992, that needed to tweak the injection pump (spill time was set a beat early, making it to sound a dry knock).

To pull out crank pulley I made some basic tools from "NASA's" plans, in order to reach the timing belt.

A few pics to enjoy...

VP
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
PETTER - PAZ1 - New project - Gantry crane is done and aproved
« Reply #182 on: June 06, 2021, 09:38:56 PM »
Hi Gentles

Gantry crane is done, and aproved.... by wife.

It only needs to be tested with the desired load limit!.

Cheers
VP
« Last Edit: June 07, 2021, 01:48:15 PM by sirpedrosa »
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

BruceM

  • Hero Member
  • *****
  • Posts: 3054
    • View Profile
Re: PETTER - PAZ1 - New project
« Reply #183 on: June 07, 2021, 01:03:32 AM »
Nicely done!  The swing for testing adds scale; It's big!


sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
PETTER - PAZ1 - Question for all members - gear pumps
« Reply #184 on: October 03, 2021, 09:37:12 PM »
Hi Gentles

Please give me some lights here: Im wondering to make a simple log splitter with one of these Petters.

But for this task I need some help, this site (https://www.dieselworldmag.com/diesel-engines/petter-paz1-diesel-engines) states that the "peak torque value of 11 lbs-ft occurred at 1500 rpm".

That said, I need to know what kind of hydraulic pump I need (Im looking for a 2 stage, due to its way of work, specialy in low pressure) in order this engine can go with it (I think I need also some sort of rpm multiplier)

So please be my guests to give all help needed.

Cheers
VP
« Last Edit: October 03, 2021, 09:39:23 PM by sirpedrosa »
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
PETTER - PAZ1 - A business card of a friend
« Reply #185 on: March 15, 2022, 08:58:06 PM »
Hi Gentles

I was leafing through some papers and I found a business card of a friend.

I think lots of members had him as friend too.

Cheers
VP
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: PETTER - PAZ1 - New project - wiring AVR to alternator
« Reply #186 on: September 18, 2023, 09:20:11 PM »
Gentles, Bob

Bob give a hand here please.

Pay atention to my reply here: https://listerengine.com/smf/index.php?topic=8333.msg102277#msg102277

Now I want to put the AVR in to get power as stable as possible.

Windings look like the sketch below. And the AVR is a cheap one.

How should I connect it to make it right!

Cheers
VP
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).