Puppeteer
« previous next »
Pages: 1 ... 9 10 [11] 12 13

Author Topic: PETTER - PAZ1 - New project  (Read 57106 times)

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
PETTER - PAZ1 - New project - Pulley in genhead
« Reply #150 on: December 24, 2019, 04:43:28 PM »
Hi Gentles

A "A"class belt, 2 groves pulley fitted in genhead, after turned to shaft spec.

Things are going... slowly, but not halted.

Have a Merry Xtmas all.
Cheers
VP
« Last Edit: December 24, 2019, 04:49:06 PM by sirpedrosa »
Logged
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

veggie

  • Keep Calm and Start the Lister !
  • Hero Member
  • *****
  • Posts: 843
    • View Profile
Re: PETTER - PAZ1 - New project
« Reply #151 on: December 31, 2019, 04:33:26 PM »
sirpedrosa,

I just viewed your video of the Petter running.
That is a beautiful engine !
You did a great job of refurbishing and mounting it.
I would love to have a Petter also but very few were imported to my country.
Nice job !

veggie
Logged
- 6/1 GM90 Listeroid - Delco 33si Alternator
- Changfa R175 - Lease/Neville Alternator
- JiangDong R165 Air cooled - 2 kw
- Changfa S195 (Waiting for a project)

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: PETTER - PAZ1 - New project
« Reply #152 on: December 31, 2019, 05:32:06 PM »
Hi Veggie

Have a Happy year, if not yet!

2nd cart  waiting for chestnut tree wood, and a pair of swivel casters, to make the genny.

cheers
VP
« Last Edit: December 31, 2019, 05:46:02 PM by sirpedrosa »
Logged
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: PETTER - PAZ1 - New project - - Engine log book
« Reply #153 on: February 16, 2020, 12:38:39 AM »
Hi Gentles

Engine log book for all rebuilded engines.

Cheers
VP
Logged
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
PETTER - PAZ1 - New project - hydraulic press, amazing tool
« Reply #154 on: March 02, 2020, 02:10:47 PM »
Hi Gentles

Today I looked to may press, and realised it is an amazing tool, not only for bushing or bearing, but also to glue my shoe!

Nothing like a pic...

Cheers
VP
Logged
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
PETTER - PAZ1 - New project - making support to stow start handle
« Reply #155 on: April 06, 2020, 10:52:13 PM »
Hi Gentles

With all this idling life, and stores closed, geted a tip of pipe to make a support to stow start handle in the cart.

All cut and welded, angle grinder decide to blow a ball bearing at middle of job. It's all in a days's work!

Strip, clean... buy new set of bearings (after all it's stripped) and finish the job.

Cheers, and stay safe.
VP
Logged
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
PETTER - PAZ1 - New project - making support to stow start handle - resume task
« Reply #156 on: April 07, 2020, 01:50:18 PM »
Hi Gentles

Resuming task... back on trak.

Stay safe
VP
Logged
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
PETTER - PAZ1 - New project - making support to stow start handle done
« Reply #157 on: April 07, 2020, 07:13:38 PM »
Hi Gentles

Just 2 pics to show off. one with general idea, and other show detail of the ratchet holder.

Cheers
VP
Logged
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

dieselspanner

  • Hero Member
  • *****
  • Posts: 726
    • View Profile
Re: PETTER - PAZ1 - New project
« Reply #158 on: April 07, 2020, 08:25:41 PM »
More nice work!

And you repaired the angle grinder rather than throwing it away and buying a new one.....

Stay Safe

Cheers
Stef
Logged
Tighten 'til it strips, weld nut to chassis, peen stud, adjust with angle grinder.

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
PETTER - PAZ1 - New project - angle grinder
« Reply #159 on: April 07, 2020, 09:30:40 PM »
Hi Stef

3 ball bearing 7€. The nearby retailer had it in stock, so he pass bearings under the door and same did I with payment.

This angle grinder has been refurbish for several times, it has 15 years, and countless hours work. The inside gear case has the brass bushing with some worn.

Stay safe.
VP
Logged
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
PETTER - PAZ1 - New project - start handle holder done
« Reply #160 on: April 09, 2020, 07:25:04 PM »
Hi Gentles

Start handle holder done, and a vid to stretch the connecting rod for a few minutes, so that the dust comes out of the cylinder fins... and boredom!

Here in FB: https://www.facebook.com/valdemar.pedrosa/videos/2935924463141315/?t=289

Stay Safe
VP
« Last Edit: April 09, 2020, 10:39:43 PM by sirpedrosa »
Logged
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
PETTER - PAZ1 - New project - 416 on the kart - the before
« Reply #161 on: April 10, 2020, 10:58:53 AM »
Hi Gentles

Nothing like a pic of before state to appreciate our work.

Cheers
VP
« Last Edit: April 10, 2020, 11:02:01 AM by sirpedrosa »
Logged
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
PETTER - PAZ1 - New project - 425 trolley prototype
« Reply #162 on: April 26, 2020, 09:44:22 PM »
Hi Gentles

While life is idling, and stores closed we got to invent something to do.

This time a prototype trolley for 425 unit and seeing the set and offset of gen head, and wheels.

2 pics for enthusiasts.

Stay safe.
VP
« Last Edit: April 26, 2020, 10:17:40 PM by sirpedrosa »
Logged
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

dax021

  • Full Member
  • ***
  • Posts: 221
    • View Profile
Re: PETTER - PAZ1 - New project
« Reply #163 on: April 27, 2020, 09:17:43 AM »
Hi VP, you seem to have an endless supply of old engines to restore.  I'm sure it keeps you pretty busy, where do you find the time to do police work? :)
Logged

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
PETTER - PAZ1 - New project - idling life
« Reply #164 on: April 27, 2020, 09:50:35 AM »
Hi Dax

Just the 2 Petter, the Lister and Bernard, we can call engines; other are some pieces of junk I toke a few time and patience to see what they had to give.

The Force work is fine, people understand this times are not to joke, and I just lead the team.

Another rust piece of iron came from village to see if it come to life. A sickle bar mower, we call it comb mower. Engine is already restored.

2 pics for the curious.

Stay safe.
VP

Logged
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).
Pages: 1 ... 9 10 [11] 12 13
« previous next »