Author Topic: PETTER - PAZ1 - New project  (Read 18944 times)

sirpedrosa

  • Sr. Member
  • ****
  • Posts: 480
  • 21NOV2019 - Finally I hear that sound
    • View Profile
PETTER - PAZ1 - New project - Pulley in genhead
« Reply #150 on: December 24, 2019, 04:43:28 PM »
Hi Gentles

A "A"class belt, 2 groves pulley fitted in genhead, after turned to shaft spec.

Things are going... slowly, but not halted.

Have a Merry Xtmas all.
Cheers
VP
« Last Edit: December 24, 2019, 04:49:06 PM by sirpedrosa »
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227

veggie

  • Keep Calm and Start the Lister !
  • Hero Member
  • *****
  • Posts: 551
    • View Profile
Re: PETTER - PAZ1 - New project
« Reply #151 on: December 31, 2019, 04:33:26 PM »
sirpedrosa,

I just viewed your video of the Petter running.
That is a beautiful engine !
You did a great job of refurbishing and mounting it.
I would love to have a Petter also but very few were imported to my country.
Nice job !

veggie
- 6/1 GM90 Listeroid - Delco 33si Alternator
- Changfa R175 - Lease/Neville Alternator
- Kubota Z482 - 4kw
- JiangDong R165 Air cooled - 2 kw

sirpedrosa

  • Sr. Member
  • ****
  • Posts: 480
  • 21NOV2019 - Finally I hear that sound
    • View Profile
Re: PETTER - PAZ1 - New project
« Reply #152 on: December 31, 2019, 05:32:06 PM »
Hi Veggie

Have a Happy year, if not yet!

2nd cart  waiting for chestnut tree wood, and a pair of swivel casters, to make the genny.

cheers
VP
« Last Edit: December 31, 2019, 05:46:02 PM by sirpedrosa »
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227

sirpedrosa

  • Sr. Member
  • ****
  • Posts: 480
  • 21NOV2019 - Finally I hear that sound
    • View Profile
Re: PETTER - PAZ1 - New project - - Engine log book
« Reply #153 on: February 16, 2020, 12:38:39 AM »
Hi Gentles

Engine log book for all rebuilded engines.

Cheers
VP
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227

sirpedrosa

  • Sr. Member
  • ****
  • Posts: 480
  • 21NOV2019 - Finally I hear that sound
    • View Profile
PETTER - PAZ1 - New project - hydraulic press, amazing tool
« Reply #154 on: March 02, 2020, 02:10:47 PM »
Hi Gentles

Today I looked to may press, and realised it is an amazing tool, not only for bushing or bearing, but also to glue my shoe!

Nothing like a pic...

Cheers
VP
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227

sirpedrosa

  • Sr. Member
  • ****
  • Posts: 480
  • 21NOV2019 - Finally I hear that sound
    • View Profile
PETTER - PAZ1 - New project - making support to stow start handle
« Reply #155 on: April 06, 2020, 10:52:13 PM »
Hi Gentles

With all this idling life, and stores closed, geted a tip of pipe to make a support to stow start handle in the cart.

All cut and welded, angle grinder decide to blow a ball bearing at middle of job. It's all in a days's work!

Strip, clean... buy new set of bearings (after all it's stripped) and finish the job.

Cheers, and stay safe.
VP
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227

sirpedrosa

  • Sr. Member
  • ****
  • Posts: 480
  • 21NOV2019 - Finally I hear that sound
    • View Profile
Hi Gentles

Resuming task... back on trak.

Stay safe
VP
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227