Author Topic: Resurrection of a Lister 12/2  (Read 89244 times)

AdeV

  • Administrator
  • Hero Member
  • *****
  • Posts: 659
    • View Profile
Re: Resurrection of a Lister 12/2
« Reply #315 on: December 15, 2020, 04:53:17 PM »
Good man!

I did find my tank (eventually...), but it's still half full of diesel & I've not had chance to get it all out, apart & cleaned...
Cheers!
Ade.
--------------
1x Lister CS Start-o-Matic (complete, runs)
0x Lister JP4 :( - Sold to go in a canal boat.

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Resurrection of a Lister 12/2 - Fuel tank Chain
« Reply #316 on: December 15, 2020, 08:40:00 PM »
AdeV

You didn't get the challenge, so here it goes: The chain I got it from bijou store, can you believe that?

If you dont have a dog... a cat will get it!

Stay safe.
VP
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

AdeV

  • Administrator
  • Hero Member
  • *****
  • Posts: 659
    • View Profile
Re: Resurrection of a Lister 12/2 - Fuel tank Chain
« Reply #317 on: December 16, 2020, 10:25:20 AM »
AdeV

You didn't get the challenge, so here it goes: The chain I got it from bijou store, can you believe that?

If you dont have a dog... a cat will get it!


Haha - Nice bit of lateral thinking there... I think the original is brass (not sure), but I don't suppose it matters what it is, so long as it doesn't go rusty... more of a problem in our wonderful English climate than yours I suspect!
Cheers!
Ade.
--------------
1x Lister CS Start-o-Matic (complete, runs)
0x Lister JP4 :( - Sold to go in a canal boat.

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Resurrection of a Lister 12/2 - Fuel tank Chain
« Reply #318 on: December 19, 2020, 06:52:03 PM »
Gentles, AdeV

Yes, chain, float and weight would be brass, but I couldnt found that type o chain with 4mm, only more and only chrome plated. This one fits like a glove, because links are square, and it has a great travel speed.

Meanwhile, bench drill machine is sorted, with a coat of paint. Unfortunately the bench I made with 12mm threaded rods swing more than I expected. I need to put it some cross bars to stabilize it.

Chucks are on way, says chineses.

Some pics for entusiastes.

Stay safe.
VP
« Last Edit: December 19, 2020, 06:54:04 PM by sirpedrosa »
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Resurrection of a Lister 12/2 - Stand Drill plan B
« Reply #319 on: December 29, 2020, 11:30:07 PM »
Gentles

Bench drill machine stand finish with plan B. 4 legs of 20mm rebar give it the stability required, with framework of 12mm rebar. Shelf for drill bits, and upper table for drill machine.

3 pics to amuse.

Stay safe.
VP
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Resurrection of a Lister 12/2 - Stand Drill, Voilá
« Reply #320 on: January 02, 2021, 08:33:59 PM »
Hi Gentles

First of all happy new year to everybody.

Drill stand is done, and drill on it.

Stay safe.
VP
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Resurrection of a Lister 12/2 - Lister Junior Marketing
« Reply #321 on: January 23, 2021, 06:51:01 PM »
Hi Gentles

Found around net a couple of pics of Lister Junior product "marketing", that may cheer our members, within this difficult days.

Stay safe
VP
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

mike90045

  • Mendocino Metro
  • Hero Member
  • *****
  • Posts: 1594
  • Mmmm BBQ
    • View Profile
    • Mikes Solar PV page
Re: Resurrection of a Lister 12/2
« Reply #322 on: January 24, 2021, 07:21:51 AM »
Lister Jr pics - I can hear it ticking over.   ( wait, that's my heart, never mind)

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Resurrection of a Lister 12/2 - Stand Drill chucks arrived
« Reply #323 on: January 29, 2021, 02:45:19 PM »
Hi Gentles

Finally spring and chucks arrived, and drill is ready to roll.

Stay safe.
VP
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Resurrection of a Lister 12/2 - Failed to get new project! Damn!!!!
« Reply #324 on: February 27, 2021, 07:11:46 PM »
Hi Gentles

Maybe you already had being in this mile stone! Seen an add with a Lister CD, made contact with seller but didnt reserve it (sometimes sellers are twisted minds) near my village (30km far) and tell him id make a visit next weekend (mean last weekend).

Filled wallet with some bills, and got there. A phone call and he said engine where gonne day before. Damn!

Now the buyer gave it a jetwash and put it again on add, 3X price he paid. and doesnt know what engine is! Damn, Damn, Damn!!!

See pic of seller, and now pic of buyer.

Damn, it would be already disassembled down stair, and next week it will have MBG fresh paint. Damn, Double Damn......Damn.

Stay safe.
« Last Edit: February 27, 2021, 07:13:17 PM by sirpedrosa »
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Resurrection of a Lister 12/2 - A sibling spotted (lets see)
« Reply #325 on: May 21, 2021, 11:50:50 PM »
Hi Gentles

A few time ago I was told a very rusty iron still seated on a field.

Today I made a divert of... 200km to see it.

I think it looks worse than it is... off course its seized! I was told its seated under weather since my spotter remembers!

Couldn't make any better pics, because there was a shepherd dog warning me that was its place.

Anyway, ill try to fetch it.

VP
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Resurrection of ANOTHER Lister 12/2 - Does it worth?
« Reply #326 on: May 31, 2021, 07:05:22 PM »
Hi Gentles

More pics about the 12/2R.

Some opinion asked!

Cheers
VP

PS: notice some frost repairs in both cyls!
« Last Edit: May 31, 2021, 07:08:38 PM by sirpedrosa »
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: Resurrection of a Lister 12/2
« Reply #327 on: June 12, 2021, 06:37:40 PM »
Hi Gentles

This afternoon take a few minutes to exercise my arm, and stretch the con rods to the 12/2.

a vid is at FB, here: https://www.facebook.com/valdemar.pedrosa/videos/4126863360714080

Cheers
VP
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

mike90045

  • Mendocino Metro
  • Hero Member
  • *****
  • Posts: 1594
  • Mmmm BBQ
    • View Profile
    • Mikes Solar PV page
Re: Resurrection of a Lister 12/2
« Reply #328 on: June 12, 2021, 10:56:22 PM »
Hi Gentles

This afternoon take a few minutes to exercise my arm, and stretch the con rods to the 12/2.

a vid is at FB, here: https://www.facebook.com/valdemar.pedrosa/videos/4126863360714080

Cheers
VP
Can't see it !
This Content Isn't Available Right Now
When this happens, it's usually because the owner only shared it with a small group of people, changed who can see it

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: Resurrection of a Lister 12/2
« Reply #329 on: June 13, 2021, 10:43:32 AM »
Hi Mike

Stationary Engine Enthusiast, is a closed group, you just need to ask to join!

You will like to follow it. Give a try!

Cheers
VP
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).