Author Topic: Resurrection of a Lister 12/2  (Read 89247 times)

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Resurrection of a Lister 12/2 - Late Christmas
« Reply #270 on: January 16, 2020, 09:44:59 PM »
Hi Gentles

Just passing by to show my hex bit socket set that lands in my shoe, to use in my late project.

Stay safe
VP
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Resurrection of a Lister 12/2 - Torque wrenches certified
« Reply #271 on: January 25, 2020, 12:04:58 AM »
Hi Gentles

Remember my torque wrenches? The big one has its new locknut, and the small was out of spec.

Both taken to the metrology Lab of ISQ (see: https://www.isq.pt/EN/services/metrology/) and certified (see seals).

This Lab is internationally renowned.

Be safe.
VP

« Last Edit: January 25, 2020, 12:09:23 AM by sirpedrosa »
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Resurrection of a Lister 12/2 - Another step in new project
« Reply #272 on: February 02, 2020, 12:08:55 AM »
Hi Gentles

New project is going. Today making the camshaft extention to fit starting handle. Made also the dog and weld it to an adapted crank.

2 pic for the enthusiasts.

Cheers
VP

PS: now it only needs a steel spring pin.
« Last Edit: February 02, 2020, 03:59:01 PM by sirpedrosa »
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Resurrection of a Lister 12/2 - One head gasket to south, maybe!
« Reply #273 on: February 04, 2020, 10:31:57 PM »
Hi Gentles

Today I was maintaining the Lister. I filled the cylinder jackets with water, and when it started to work he splashed some water through the hot water outlet manifold.

I suspect that one of the head gaskets must be leaking. A few more hours to take the heads apart.

Nothing that a Lister can't be worth.

Anyway, TLC.

Cheers
VP
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: Resurrection of a Lister 12/2 - cyl #2 low spot leaking
« Reply #274 on: February 05, 2020, 07:45:19 PM »
Hi Gentles

The two heads are out and cleaned. A eye ball magnifier shows cyl # 2 was leaking due to a low spot.

Do you remember I didn't skim the cylindres, because I don't want to loss original stamps in the cast iron.

I think that just a retorque of studs will do, but in this way I can get the global picture of the work done before.

Now will get copper gasket seal to fill that little spot, and torque nuts to proper spec.

Cheers
VP

Pics:
#1 refer to cylinder 1
#2 refer to cyl 2
« Last Edit: February 05, 2020, 07:55:10 PM by sirpedrosa »
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: Resurrection of a Lister 12/2 - cyl #2 low spot leaking
« Reply #275 on: February 05, 2020, 07:47:39 PM »
Now pics from cyl #2
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: Resurrection of a Lister 12/2 - copper gasket applied, and heads in place
« Reply #276 on: February 06, 2020, 05:55:49 PM »
Hi Gentles

Copper gasket applied in both bottom face of gaskets, because the face of heads has been skimmed and so they are perfectly flat.

Heads already in place and torqued, and I forget to make a pic of the coated gaskets.

Next start up of it i´ll let it warm up a bit to retorque all nuts, while it stays warm after shutdown.

Cheers
VP
PS: 1 pic of the product.
« Last Edit: February 06, 2020, 05:57:41 PM by sirpedrosa »
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: Resurrection of a Lister 12/2 - Engine log book
« Reply #277 on: February 16, 2020, 12:38:01 AM »
Hi Gentles

Engine log book for all rebuilded engines.

Cheers
VP

By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: Resurrection of a Lister 12/2 - Elsa and Fabien put the shack down
« Reply #278 on: February 17, 2020, 10:06:34 PM »
Hi Gentles

Remember I said that the shack where the Lister was could not take another winter?

Storms Elsa and Fabian broke the roof of the shack.

2 pics from before and after.

Cheers
VP

PS: on the right below you can see the lister foundation.
« Last Edit: February 17, 2020, 10:08:17 PM by sirpedrosa »
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).


sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: Resurrection of a Lister 12/2
« Reply #280 on: February 18, 2020, 01:43:44 PM »
Hi Mike

The Lister is in my home, with a nice paint job!

Cheers
VP
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Resurrection of a Lister 12/2 - Maintenance after coated gaskets
« Reply #281 on: February 22, 2020, 11:21:25 PM »
Hi Gentles

Today the 12/2 had a good run, and the water in jackets reach 50ºC.

A pic and a video to the enthusiasts.

Good Weekend
VP

Vid: https://drive.google.com/open?id=1iUbNOBQ-Sjq6P01sB1pcoOXg4MzIpyVZ

« Last Edit: February 22, 2020, 11:23:09 PM by sirpedrosa »
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: Resurrection of a Lister 12/2 - 25001 views. Why?
« Reply #282 on: March 04, 2020, 05:58:55 PM »
Hi Gentles

25001 views. Just curiosity, or after all there is something more that can be learned?

Cheers
VP
« Last Edit: March 04, 2020, 06:00:48 PM by sirpedrosa »
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Late project is going on
« Reply #283 on: March 07, 2020, 12:39:53 AM »
Hi Gentles

Late project is also almost finished: Alternator is done, now is the starter motor.

Some pics for enthusiasts.

Cheers
VP
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

snowman18

  • Full Member
  • ***
  • Posts: 216
    • View Profile
Re: Late project is going on
« Reply #284 on: March 07, 2020, 01:40:29 AM »
Hi Gentles

Late project is also almost finished: Alternator is done, now is the starter motor.

Some pics for enthusiasts.

Cheers
VP

Did you rewind the field coils yourself.