Author Topic: Resurrection of a Lister 12/2  (Read 89245 times)

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Resurrection of a Lister 12/2 - timing fuel pumps
« Reply #240 on: November 16, 2019, 04:32:07 PM »
9 - start to unscrew the IP tappet bolt;

10 - align the line of the plunger with start injection line;

11 - detail of fine tunning;

12 - final course of the plunger (very important this clearence to not damage de IP);

« Last Edit: November 16, 2019, 11:08:06 PM by sirpedrosa »
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Resurrection of a Lister 12/2 - timing left pump
« Reply #241 on: November 16, 2019, 10:55:00 PM »
13 - setting TDC, with 2 marks for centering comparator;

14 - setting mark in fly rim, and verifiing with comparator (pencil needing glasses to read scale);

15 - aling the line of the plunger with start injection line;

16 - detail of fine tunning;
« Last Edit: November 16, 2019, 11:10:05 PM by sirpedrosa »
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Resurrection of a Lister 12/2 - water exit manifold T
« Reply #242 on: November 16, 2019, 10:57:24 PM »
Brass T came from lathe workshop.
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: Resurrection of a Lister 12/2 - olives harvest
« Reply #243 on: November 18, 2019, 10:38:37 PM »
Hi All

One more day harvesting olives...almost done for this year.

6 trees gave round 140kg.

4 pics fore those like this kind of amusement.

Cheers
VP
1 - Net to collect olives.
2 - tree already clipped.
3 - tree view... literally! (upon tree)
4 - productivity.
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

dieselspanner

  • Hero Member
  • *****
  • Posts: 726
    • View Profile
Re: Resurrection of a Lister 12/2
« Reply #244 on: November 19, 2019, 01:26:34 PM »
Hi Sp

Nice work, nice photo's.

What do you do with the olives?

Cheers
Stef
Tighten 'til it strips, weld nut to chassis, peen stud, adjust with angle grinder.

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Re: Resurrection of a Lister 12/2
« Reply #245 on: November 19, 2019, 02:17:59 PM »
Hi Stef

Each 350 kg provides a complete olive paste press. I usually get 10% extra virgin olive oil. A few kgs are salted and preserved to serve as table "hors d'oeuvre".

Cheers
VP
« Last Edit: November 19, 2019, 06:21:02 PM by sirpedrosa »
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Resurrection of a Lister 12/2 - Almost done
« Reply #246 on: November 20, 2019, 09:48:24 PM »
Hi Gentles

The beast is dressed. Only need to be bleeded and oil pump primed.

2 pics to amuse...

Cheers
VP

1 - Hot water manifold detail.
2 - general view.
« Last Edit: November 23, 2019, 03:07:07 PM by sirpedrosa »
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Resurrection of a Lister 12/2 - primed and bleeded, ready to fire up
« Reply #247 on: November 21, 2019, 10:17:54 AM »
Hi Gentels

All baskets are empty, just left the old hose clamps.

It's ready to fire up...

Cheers
VP

pics:
1- basket;
2 - Do you remember my Braims oil can?
3 - And our friend syringe? Bleed is bleed, isn't it?
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Lister 12/2 ALIVE - 21NOV2019
« Reply #248 on: November 21, 2019, 07:16:32 PM »
Hi my Friends

First of all I'd like to thanks to all of you, whom helped me to reach this mile stone.

THE LISTER IS ALIVE!

4 pics and the link to 2 vids starting cyl 1 and cyl 2.

Cylinder 1 starting: https://drive.google.com/file/d/19icG0EaDB67yH_wLljhglXsW1nyKESBo/view?usp=sharing
Cylinder 2 starting: https://drive.google.com/file/d/1mk67GVyECd4eY0EDzCZ4OsBGyU82oe-W/view?usp=sharing

Couldn't start both cylinder at same time, because I realised it was to much kinetic energy to that casters in order to run steady.

Next step: making trolley and cooling tank.

Cheers
VP
« Last Edit: November 21, 2019, 08:43:22 PM by sirpedrosa »
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

Willw

  • Full Member
  • ***
  • Posts: 143
    • View Profile
Re: Resurrection of a Lister 12/2
« Reply #249 on: November 21, 2019, 11:24:48 PM »
Congratulations on getting her running. Good job.
Daily driver '97 GMC W4 tipper on WVO/Kerosene mix.
6/1 clone standby generator.
Too many projects.

saba

  • Full Member
  • ***
  • Posts: 119
    • View Profile
Re: Resurrection of a Lister 12/2
« Reply #250 on: November 23, 2019, 01:41:23 AM »
Congratulations, I can not wait for a 10 minute youtube video.

good job !

Bernhard

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Resurrection of a Lister 12/2 - Temperature gauge
« Reply #251 on: November 29, 2019, 08:33:51 AM »
Hi All

A new temperature gauge with 1/2 BSP sleeve  for placing in the hot water manifold.

Cheers
VP
« Last Edit: December 01, 2019, 09:15:27 AM by sirpedrosa »
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Resurrection of a Lister 12/2 - time to decorating
« Reply #252 on: November 30, 2019, 11:37:40 PM »
Hi Gentles

The greeny is getting fancy. Look at his temperature gauge!

A new toy for my ISEKI, 2nd hand box but condition new - a bargain, trully!

And after almost one month of rain, tangerine tree is heavy loaded.

Have a nice weekend.
VP
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sirpedrosa

  • Hero Member
  • *****
  • Posts: 863
  • 21NOV2019 - Finally I hear that sound... again
    • View Profile
Resurrection of a Lister 12/2 - valve tap arrived
« Reply #253 on: December 03, 2019, 02:07:06 PM »
Hi Gentles

Cooling system is getting shape.

Knife valve tap arrived... from UK.

Cheers
VP
« Last Edit: December 03, 2019, 02:08:58 PM by sirpedrosa »
By order of firing up:
Bernard 18A - 1968 (mama's water pump - year of my birth)
Petter PAZ1 - Jun 1967, 3HP, sn 416xxxx
Petter PAZ1 - Nov 1979, 3HP, sn 425xxxx
Lister 12/2 - 12651227, the pearl!
Deutz MAH 914, 1952 - Zündfix in chamber and go (7Mai2023).

sinna42

  • Newbie
  • *
  • Posts: 16
    • View Profile
Re: Resurrection of a Lister 12/2
« Reply #254 on: December 05, 2019, 11:19:44 AM »
Hi Sirpedrosa,

In post #179 you had a couple of photos of the fretting damage caused by slightly loose flywheels, but there were no replies !
Were the sizes ok so that you could just refit the flywheels with a well tightened gib key ?
Or did you have the shafts built up & remachined ?

I've just removed one of my heavy SOM flywheels from my Lister 12-2 & have the same sort of damage.
Not measured actual sizes yet.

What do folk think about using Loctite to address this problem ?
I know that Listerdiesel used Loctite on one of the flywheels on his Ruston 1ZHR.

Cheers,
Jim
« Last Edit: December 05, 2019, 03:00:17 PM by sinna42 »
Lister CS 3/1 1938, Lister CS 3/1 1939, Lister H4 Pump, Coventry Victor AN4 Mk1 1944, Gardner 1L2 1962