Hi Sirpedrosa,
In post #179 you had a couple of photos of the fretting damage caused by slightly loose flywheels, but there were no replies !
Were the sizes ok so that you could just refit the flywheels with a well tightened gib key ?
Or did you have the shafts built up & remachined ?
I've just removed one of my heavy SOM flywheels from my Lister 12-2 & have the same sort of damage.
Not measured actual sizes yet.
What do folk think about using Loctite to address this problem ?
I know that Listerdiesel used Loctite on one of the flywheels on his Ruston 1ZHR.
Cheers,
Jim