Puppeteer

Author Topic: Clear coating for bare metal components?  (Read 5308 times)

Samo

  • Full Member
  • ***
  • Posts: 176
    • View Profile
Re: Clear coating for bare metal components?
« Reply #15 on: May 03, 2018, 08:33:06 AM »
Update on the linseed oil, I'm now living right on the coast and the old listeroid is outside with a tarp over it when not running. All parts coated in boiled linseed are perfect. All bare metal not coated now have surface rust!
Lister CS 12/2 & JKSON 10/1 Listeroid

EdDee

  • Hero Member
  • *****
  • Posts: 773
    • View Profile
Re: Clear coating for bare metal components?
« Reply #16 on: May 03, 2018, 08:53:03 AM »
Hey Guys,

Anybody tried "Renaissance Wax" for metal/wood protection outdoors and indoors.... I have used it quite successfully, albeit not in an "open to the elements" environment on quite a few "single-cylinder-disposable-piston" type machines....

Regds
Ed
12/1 750RPM/9HP Roid 5kVA- WMO Disposal/Electricity & Hot Water Gen
12/1 650RPM/8HP Roid 4.5kVa - Demon Dino
Chinese Yanmar - Silent Runner with AutoStart
Classic Komatsu 1963 Dozer/Fergusson 35 Gold Belly ...
Bikes,Cars,Gunsmithing & Paintball...Oh yes, a 5Ha open air Workshop to play in!

guest23837

  • Guest
Re: Clear coating for bare metal components?
« Reply #17 on: June 26, 2018, 11:46:06 PM »
https://www.morrislubricants.co.uk/ankor-wax-preservative-fluid.html

Try saying this quickly after a few pints (may not be funny to Americans)