Author Topic: AVR and voltage setting  (Read 8418 times)

32 coupe

  • Sr. Member
  • ****
  • Posts: 452
  • "Doc Johnson" on call !
    • View Profile
AVR and voltage setting
« on: November 28, 2015, 03:13:41 PM »
My new 7.5 st head came from Tom with the AVR installed
and the voltage set at 220.
I want to set it for 120 volts.  Can I just move the "U" connections
and reset for 120 volts or do I have to change anything on the AVR ?

I hope this question makes sense,

Metro 6/1 turning a ST 7.5 KW gen head
Changfa 1115 turning a ST 15 KW gen head
Ashwamegh 2/25
John Deere 110 TBL
New Holland TC 30

"I was sitting here reading this thinking what an idiot you are until I realized it was one of my earlier posts !"


  • Hero Member
  • *****
  • Posts: 3172
    • View Profile
    • Lister Parts
Re: AVR and voltage setting
« Reply #1 on: November 28, 2015, 05:56:30 PM »
Those AVRs usually are set to sense only one leg i.e. 120vac.
If yours is wired differently, then I would ask Tom for clarification on what was done. He is always very helpful in providing good instructions for his stuff.

ALL Things Lister/Petter - Americas
Lyons Kansas warehousing and rebuild operations


  • Hero Member
  • *****
  • Posts: 2936
    • View Profile
Re: AVR and voltage setting
« Reply #2 on: November 28, 2015, 09:58:01 PM »
I think Tom at cgg also sells a 240v avr, so you'd best check with him on your particular model.  He provides very good support.