Author Topic: Correct starter???  (Read 3737 times)

Jpike

  • Newbie
  • *
  • Posts: 15
    • View Profile
Correct starter???
« on: April 11, 2013, 12:04:37 PM »
So after some research, i believe i have found the correct starter for my Lister SR2.  Can someone on here maybe confirm that this is right?  Here are the markings on my current starter:

Lucas
26157K
M45G
DA143

this is the starter I believe fits my application.  Any help is greatly appreciated, or if anyone knows of another location, preferably canadian that sells the correct part wouls also be appreciated!

regards
jamie

Combustor

  • Combustor
  • Full Member
  • ***
  • Posts: 200
    • View Profile
Re: Correct starter???
« Reply #1 on: April 11, 2013, 12:12:49 PM »
If you can still find one of those Auto Elec shops where the guy who runs it owns it, there is nothing in a M45G starter that can't be rebuilt or replaced. Good luck,   Combustor.
Toys include- Lister CS 8/1, Lister VA SOM plant and some Aussie engines.
   "Old iron in the Outback" Kimberley, West Australia.

dieselgman

  • Hero Member
  • *****
  • Posts: 3180
    • View Profile
    • Lister Parts
Re: Correct starter???
« Reply #2 on: April 11, 2013, 01:32:46 PM »
Engine rotation is the main variable that needs to be identified. A picture of your flywheel housing will do it, or engine serial number in most cases.

In North America, a Delco is most commonly used on the Listers. We also have a few of the Lucas units around.

gary@dieselgen.com

dieselgman
ALL Things Lister/Petter - Americas
Lyons Kansas warehousing and rebuild operations

Jpike

  • Newbie
  • *
  • Posts: 15
    • View Profile
Re: Correct starter???
« Reply #3 on: April 11, 2013, 06:40:18 PM »
How much for one of your starters shipped to newfoundland canada, area code A0A 3P0?

dieselgman

  • Hero Member
  • *****
  • Posts: 3180
    • View Profile
    • Lister Parts
Re: Correct starter???
« Reply #4 on: April 12, 2013, 02:55:57 AM »
These models run about $250. Shipping depends on speed required, typical flat-rate is $45.

dieselgman
ALL Things Lister/Petter - Americas
Lyons Kansas warehousing and rebuild operations

Jpike

  • Newbie
  • *
  • Posts: 15
    • View Profile
Re: Correct starter???
« Reply #5 on: April 12, 2013, 12:01:56 PM »
is that US or Canadian?  Are there any Canadian dealers if thats a US quote?

KC7NOA

  • Jr. Member
  • **
  • Posts: 78
    • View Profile
Re: Correct starter???
« Reply #6 on: February 01, 2022, 09:45:19 AM »
Long Old Thread .. i sure hope the OP can speak up and state if it worked out !!!!


KC7NOA

  • Jr. Member
  • **
  • Posts: 78
    • View Profile
Re: Correct starter???
« Reply #7 on: February 20, 2022, 06:12:08 AM »
Or gary

broncodriver99

  • Sr. Member
  • ****
  • Posts: 380
    • View Profile
Re: Correct starter???
« Reply #8 on: February 20, 2022, 07:36:49 AM »
The OP hasn't been here in almost 9 years, but I hope someome chimes in for you.

KC7NOA

  • Jr. Member
  • **
  • Posts: 78
    • View Profile
Re: Correct starter???
« Reply #9 on: February 20, 2022, 10:58:42 AM »
I hope so too ...

The OP might be long gone .... But Gary did respond to email ...
And I'm still trying to workout what I need.
I have pictures posted into a different thread about my SR2(ccw)


KC7NOA

  • Jr. Member
  • **
  • Posts: 78
    • View Profile
Re: Correct starter???
« Reply #10 on: February 25, 2022, 04:01:46 PM »
Engine rotation is the main variable that needs to be identified. A picture of your flywheel housing will do it, or engine serial number in most cases.

In North America, a Delco is most commonly used on the Listers. We also have a few of the Lucas units around.

gary@dieselgen.com

dieselgman

Is Gary OK?... started a conversation with him .. but has gone quiet

Fig

  • Newbie
  • *
  • Posts: 18
    • View Profile
Re: Correct starter???
« Reply #11 on: March 06, 2022, 11:52:41 PM »
Thought he retired. Might be wrong.

38ac

  • Hero Member
  • *****
  • Posts: 2090
    • View Profile
Re: Correct starter???
« Reply #12 on: March 08, 2022, 11:02:45 AM »
Gary is alive and well and as retired as he can be while still operating the engine and parts buisiness until a buyer can be located. He did drop one of his emails that is listed here but responds to GSJ@ GCI.net. I just recently purchased parts from him.
Collector and horder of about anything diesel