Correct starter???

[Jpike]

So after some research, i believe i have found the correct starter for my Lister SR2.  Can someone on here maybe confirm that this is right?  Here are the markings on my current starter:

Lucas
26157K
M45G
DA143

this is the starter I believe fits my application.  Any help is greatly appreciated, or if anyone knows of another location, preferably canadian that sells the correct part wouls also be appreciated!

regards
jamie

[Combustor]

If you can still find one of those Auto Elec shops where the guy who runs it owns it, there is nothing in a M45G starter that can't be rebuilt or replaced. Good luck,   Combustor.

[dieselgman]

Engine rotation is the main variable that needs to be identified. A picture of your flywheel housing will do it, or engine serial number in most cases.

In North America, a Delco is most commonly used on the Listers. We also have a few of the Lucas units around.

gary@dieselgen.com

dieselgman

[Jpike]

How much for one of your starters shipped to newfoundland canada, area code A0A 3P0?

[dieselgman]

These models run about $250. Shipping depends on speed required, typical flat-rate is $45.

dieselgman

[Jpike]

is that US or Canadian?  Are there any Canadian dealers if thats a US quote?

[KC7NOA]

Long Old Thread .. i sure hope the OP can speak up and state if it worked out !!!!

[KC7NOA]

Or gary

[broncodriver99]

The OP hasn't been here in almost 9 years, but I hope someome chimes in for you.

[KC7NOA]

I hope so too ...

The OP might be long gone .... But Gary did respond to email ...
And I'm still trying to workout what I need.
I have pictures posted into a different thread about my SR2(ccw)

[KC7NOA]

Engine rotation is the main variable that needs to be identified. A picture of your flywheel housing will do it, or engine serial number in most cases.

In North America, a Delco is most commonly used on the Listers. We also have a few of the Lucas units around.

gary@dieselgen.com

dieselgman

Is Gary OK?... started a conversation with him .. but has gone quiet

[Fig]

Thought he retired. Might be wrong.

[38ac]

Gary is alive and well and as retired as he can be while still operating the engine and parts buisiness until a buyer can be located. He did drop one of his emails that is listed here but responds to GSJ@ GCI.net. I just recently purchased parts from him.