I have these left over from my work with my Metro 6/1 and Ashwamegh 25/2. One is about .024 and the other about .042 if any one is interested at $ 45.00 plus shipping let me know. They are not as pretty as some of the others I have seen here but they work. I turned them on my old Atlas lathe and they work fine. I may consider makeing more if enough intrest is shown. I am old and TRY to answer my messages once a day, so be patient. I will try to answer any questions you may have.
By the way I took a cut off wheel and put a slot in the end of the bolt to hold it when I set mine up. If you want that added I will provide that as well.
Gary