Author Topic: Looking for Honda parts  (Read 2246 times)

Doug

  • Hero Member
  • *****
  • Posts: 3386
  • Why don't pictures ever work for me?
    • View Profile
    • Doug's Petteroid Stuff
Looking for Honda parts
« on: January 30, 2011, 12:24:04 AM »
Looking for Honda GX200 parts.
No Chinese clones.

Wanted GX160 cylinder heads, and flywheel.
GX200 cranks and reasonably good condition cases that can be rebored.

Ignition coils from any of the GX small blocks ( 120 through 200 )

Thanks

Doug
It's a Good Life, If You Don't Weaken

Tom

  • Hero Member
  • *****
  • Posts: 1747
  • Green power is good.
    • View Profile
Re: Looking for Honda parts
« Reply #1 on: January 30, 2011, 12:50:36 AM »
Going racing are we? ;D
Tom
2004 Ashwamegh 6/1 #217 - ST5 just over 3k hours.

mobile_bob

  • Administrator
  • Hero Member
  • *****
  • Posts: 2787
    • View Profile
Re: Looking for Honda parts
« Reply #2 on: January 30, 2011, 03:45:48 AM »
i am thinking Doug's son is about old enough to have a gokart, and Doug is
set on scaring the poor kid to death!

gx160 head on a gx200 shortblock? no governor,  a bit of carb work?
out to be good for what? 5-6krpm and 10plus hp?

ya that outa make his hiney pucker!

bob g
otherpower.com, microcogen.info, practicalmachinist.com
(useful forums), utterpower.com for all sorts of diy info

wiebe

  • owner kubota knd3 2x
  • Newbie
  • *
  • Posts: 18
    • View Profile
Re: Looking for Honda parts
« Reply #3 on: February 14, 2011, 10:29:52 AM »
Get some metal of the flywheel ,and with the 160head on the 200cc bloc and place then the thin headgasket of the 200cc on there .
Maybe a carb from a bigger engine ,replace the valvesprings with stronger one,s .
Then it wil be a winner.