How to remove Lister CS flywheel keys effortlessly.......

[listard-jp2]

Having recently acquired a spares donor Lister VA from Spencer 1885, this was just the opportunity I needed to try out my never being out of the box genuine Lister CS flywheel key removing tool.

It took less than 5 minutes to pull each key.







Compared to other flywheel removing tools that are presently being offered elsewhere, this item beats them hands down for speed and ease of use.

[billswan]

Well how about a pix or two of the tool..........

Billswan

[listard-jp2]

I did try (and fail miserably) to upload pictures. If someone would be good enough to give me a few pointers I will have another go.

[contaucreek]

Try opening an album in the listerenginegallery link at the top of the page. If I can do it you can do it for sure.

[lowspeedlife]

click on the insert image icon as it appears you did, you notice that the img/img in inside two sets of square brackets [ ] [ ]  separate them between the two sets & insert ypur image code between & that should do it. 
 
   Scott R


OK now i'm confused, what are we doing wrong, anyone?

[listard-jp2]

click on the insert image icon as it appears you did, you notice that the img/img in inside two sets of square brackets [ ] [ ]  separate them between the two sets & insert ypur image code between & that should do it. 

Thats exactly what I tried first of all, and got the same result as you. Anyway I have now also placed these photos in the Lister engine gallery as well.

[lowspeedlife]

cool!!


Scott R

[listard-jp2]

^ Indeed!, Just to see how good this item was I didn't bother with any pre-treatment works ie no cleaning up the keyway groove, no heating the hub, or hitting it with a hammer etc. Although the keys were tight, I was able to remove all of them with the 1/2" ratchet you see hanging off the end of the tool.

The hydraulic puller you also see, although being at the limit of its size capacity dealt with pulling the flywheel, and flat belt pulley with ease.

[lowspeedlife]

pretty gutsy pulling that key without any lube   , glad to see you had the wd-40 out in picture #3

  scott r

[listard-jp2]

^ Very observant of you , that was for use on the thread of the key puller.

[contaucreek]

Whats your album name ?

[LowGear]

WILL YOU PEOPLE STOP USING WATER DISPLACER 40 AS A LUBRICANT!

Spit is better.

Ear wax lasts longer.

Bacon fat kicks its hams.

Just in case you have some diesel or WVO you'd have a far superior penetrator.  But don't mix any kerosene in with the diesel or ATF because then you'll have something that sells for over a buck an once.  Once you consider how much it costs to deliver an aerosol can to a retailer you can appreciate the cost of the crap inside.

Casey

Oh, congratulations on getting the gibs out.  I would like to see a picture.  Maybe a link to sales site.

[cgwymp]

Whats your album name ?

Indeed! User name, link, something?

[billswan]

Well here is the only thing that I can find.

http://listerenginegallery.com/main.php?g2_itemId=4375

Hope this is what we are looking for and please excuse me if this is not what listard was referring to.

Billswan

Ps I can delete this if it is wrong.....

[listard-jp2]

^ Thats the one, should have had a pointer to the gallery or something, but I am somewhat new to posting pictures etc.