Author Topic: Another Rescue Engine  (Read 28126 times)

contaucreek

  • Hero Member
  • *****
  • Posts: 619
    • View Profile
Re: Another Rescue Engine
« Reply #45 on: July 19, 2010, 11:13:02 PM »
Mr. Leonard, where did you find those bungs for the barrel and are they a good leak proof system ?  I have a green plastic barrel that I was going to use for the 16.
L.E.F. Dip #1 Threadstopper Extraordinaire

rleonard

  • Hero Member
  • *****
  • Posts: 589
  • Mattoon, Illinois
    • View Profile
Re: Another Rescue Engine
« Reply #46 on: July 19, 2010, 11:25:43 PM »
They are 1-1/4" bulkhead fittings.  Sometimes called a Tank Flange with Gasket.   Got them from the local farm store in the plumbing area.  Come with a gasket and the inner nut.  Add a hose barb and you are good to go.  About $10 for the pair.

Drill in a 2 1/4 hole with a holesaw and thread the nut on.  All done!

Bob
Faster - Better - Cheaper  You can have any two, but not all three

rmchambers

  • Hero Member
  • *****
  • Posts: 505
    • View Profile
Re: Another Rescue Engine
« Reply #47 on: July 27, 2010, 03:09:50 AM »
Wow Bob, that is one fantastic looking engine now! and with the proper transfers on it looks better than new.  I'm in awe.