Author Topic: Lister-Blackstone CD 8hp  (Read 4165 times)

meco3hp

  • Newbie
  • *
  • Posts: 15
    • View Profile
Lister-Blackstone CD 8hp
« on: June 19, 2009, 04:39:16 AM »
Hello,
      I restore vintage hit-n-miss engines as a hobby and have always been a DIY'er. I've lurked here off and on and posted a time or two. Last Saturday I finally found a Lister at a auction. It's a Lister-Blackstone CD 8hp engine. It's loose and looks to be complete. The combustion release is stuck, and the injector pump looks to need a little cleaning, but it looks like this engine is a keeper. It was a direct mount generator engine at one time. I also got a reprint of the owners manual that was in the literature that sold separately. The really cool thing about the book is the gentleman that had last owned this engine (it was a estate sale) had taped a page into the front of it, and had documented the previous owners! The first owner was a theater in Cope Colorado! I figure it was a back up gen-set or maybe a used to carry some of the load of the facade of all the lights it surely had! The other 2 owners, before the gentleman I bought it from, where both private collectors in Goodland Ks. (The auction was in Brewster Ks., between Goodland and Colby Ks.) Yes I did "add" my name, address and date of purchase to the list.
      Does anybody have parts for these engines? I know the British made Listers had British threads and the such, I haven't checked to see if this was a "kit" made engine from England or a American made engine (stored off site right now).
The tag says:
                  Model: CD
                  RPM: 1200
                  HP: 8
                  S.N.: 5182

I'm hoping to set this engine up as a backup generator or if I stumble onto a place in the county, then I might go off grid with it!

Anybody got one of these or have parts for one?

Thanks!
Richard
You say, "It can't be done!" I say, "Just hide and watch!"

Lister-Blackstone CD

apogee_man

  • Sr. Member
  • ****
  • Posts: 288
    • View Profile
Re: Lister-Blackstone CD 8hp
« Reply #1 on: June 19, 2009, 07:30:39 AM »
Hi Richard,

Congrats on your purchase!

I have a Lister built version.

Parts are a bit tough, but am working on making that situation a bit better.

Please keep us posted on what you need as you figure it out.

This is a nice engine!!!!

Regards,

Steve

Mack

  • Newbie
  • *
  • Posts: 14
    • View Profile
Re: Lister-Blackstone CD 8hp
« Reply #2 on: June 23, 2009, 09:55:08 PM »
I have one of these motors
Might have US threads,
Possible built by Nordberg.


http://www.smokstak.com/forum/showthread.php?t=16194

meco3hp

  • Newbie
  • *
  • Posts: 15
    • View Profile
Re: Lister-Blackstone CD 8hp
« Reply #3 on: June 24, 2009, 12:12:02 AM »
Hello,
       I checked that out. Good info! My screen name is "Meco3hp" over at Smokstak.

Thanks!
Richard
You say, "It can't be done!" I say, "Just hide and watch!"

Lister-Blackstone CD

listerdiesel

  • Sr. Member
  • ****
  • Posts: 321
    • View Profile
Re: Lister-Blackstone CD 8hp
« Reply #4 on: June 30, 2009, 06:36:42 PM »
US-built Lister-Blackstone CD and CE engines should have NC and NF threads, and were built by Nordberg during WWII.

UK engines started at 350006 (CD) and 380001 (CE) so yours will be a US-build.

Parts are nearly impossible to find, but we can still get hold of injection stuff.

Peter