Puppeteer
« previous next »
Pages: [1]

Author Topic: Check me on the bolt spacing for my ST5  (Read 3172 times)

Reno Speedster

  • Full Member
  • ***
  • Posts: 157
    • View Profile
Check me on the bolt spacing for my ST5
« on: October 17, 2008, 06:52:22 AM »
I am making a bracket for my ST5 but I left the manual out at the ranch and I can't measure it till I get back out there.   But... I need to make the bracket before then.  So,  I looked on line and found a manual which says that the hole spacing is 354 mm which calculates to 10 inches.  Can anyone confirm this for me so I can make this thing?  Thanks
Logged

oliver90owner

  • Hero Member
  • *****
  • Posts: 861
    • View Profile
Re: Check me on the bolt spacing for my ST5
« Reply #1 on: October 17, 2008, 07:22:45 AM »
354 mm which calculates to 10 inches

Don't know, but it is certainly not.  It can't be both as they are different measurements - unless your inch has been stretched somewhat :)

Regards, RAB
Logged

Reno Speedster

  • Full Member
  • ***
  • Posts: 157
    • View Profile
Re: Check me on the bolt spacing for my ST5
« Reply #2 on: October 17, 2008, 06:21:17 PM »
Well, that serves me right for writing a post sp late.  The measurement is 254 MM (not 354) which does translate to 10 inches.    What I'm asking is anyone can check this on an ST5 before I make this.
Logged

MacGyver

  • Sr. Member
  • ****
  • Posts: 452
    • View Profile
Re: Check me on the bolt spacing for my ST5
« Reply #3 on: October 17, 2008, 06:50:01 PM »
Yeah, 10 inches square on the ST5 / ST7.5 is right.
Logged
Steve

JKson (PS) 6/1 'roid & ST 7.5
Pages: [1]
« previous next »