Puppeteer

Author Topic: Replacing diesel supply hose  (Read 2632 times)

greasemonkey

  • Newbie
  • *
  • Posts: 16
    • View Profile
Replacing diesel supply hose
« on: April 22, 2007, 09:58:02 AM »
My listerCS has a copper supply line to the injector and I was under the impression that copper wasn't appropriate because of the softness of the material can some advise of the correct material and dimensions of the line, Cheers


Geno

  • Sr. Member
  • ****
  • Posts: 295
    • View Profile
Re: Replacing diesel supply hose
« Reply #1 on: April 22, 2007, 12:35:01 PM »
I've read the same thing about copper.
Any thick wall steel tubing should work. Mine sprung a leak. I searched all over for a shop that made the Girling fittings and didn't find a one. Had to buy a new line. I won't go so tight on the nuts again.

Thanks, Geno