Puppeteer

Author Topic: Mike Montieth has done it !  (Read 5412 times)

wrightkiller

  • Hero Member
  • *****
  • Posts: 843
    • View Profile
Mike Montieth has done it !
« on: March 07, 2007, 03:14:33 PM »
-------------- Original message --------------
From: "alternateenergy" <alternateenergy@bellsouth.net>

wrightkiller, I am already overwhelmed with orders. I have over 200 names on my waiting list already. I have passed Tier 2 and EPA has assigned me a manufacturer number. Once my paperwork is validated I'll resume imports.
 
Mike

 ;D
« Last Edit: March 07, 2007, 03:20:00 PM by wrightkiller »

mobile_bob

  • Administrator
  • Hero Member
  • *****
  • Posts: 2787
    • View Profile
Re: Mike Montieth has done it !
« Reply #1 on: March 07, 2007, 03:54:23 PM »
my advice is

if you want an engine,,, get it ordered now!!
this window of opportunity will only be open for a short time until the next tier comes into effect
so don't stand on the fence any longer.

good job Mike!

bob g
otherpower.com, microcogen.info, practicalmachinist.com
(useful forums), utterpower.com for all sorts of diy info

Doug

  • Hero Member
  • *****
  • Posts: 3386
  • Why don't pictures ever work for me?
    • View Profile
    • Doug's Petteroid Stuff
Re: Mike Montieth has done it !
« Reply #2 on: March 07, 2007, 04:38:26 PM »
Ah Ha!!!

see it just goes to show what can be done with a builder and vender who want toget good stuff to market!

Doug
It's a Good Life, If You Don't Weaken

mobile_bob

  • Administrator
  • Hero Member
  • *****
  • Posts: 2787
    • View Profile
Re: Mike Montieth has done it !
« Reply #3 on: March 08, 2007, 06:36:37 AM »
personally i cannot wait for the first compliant engine to be put online and reported on
hopefully the report will show up here,

actually i am more than hopeful that alot of folks buy them, put them into service
and report back not only their success with these engines, but if there are problems and how they
are addressed and supported by Mike.

i guess we shall see how these engines stack up against all the other engine's that are in service.
and how Mike takes care of the engine's with support afterwards.

hopeing for the best
bob g
otherpower.com, microcogen.info, practicalmachinist.com
(useful forums), utterpower.com for all sorts of diy info

jimmer

  • Jr. Member
  • **
  • Posts: 86
    • View Profile
Re: Mike Montieth has done it !
« Reply #4 on: March 08, 2007, 04:11:03 PM »

i guess we shall see how these engines stack up against all the other engine's that are in service.
and how Mike takes care of the engine's with support afterwards.


Mike has always supported the engines he has sold.

I don't know why this would be any different.

jim

mobile_bob

  • Administrator
  • Hero Member
  • *****
  • Posts: 2787
    • View Profile
Re: Mike Montieth has done it !
« Reply #5 on: March 08, 2007, 11:03:18 PM »
please don't misunderstand, i am not saying mike has not or will not support his engines.

my only use of this language is in the sense that suppliers in general have had issues, some very bad with no support and some not so bad with alot of support..

there are those that have been very critical of other suppliers,, i see no reason not to use "critical thinking and reasoning" in this example as well.

i am very interested in seeing his success and the results of all his epa work.

bob g
otherpower.com, microcogen.info, practicalmachinist.com
(useful forums), utterpower.com for all sorts of diy info

johnny williams

  • Jr. Member
  • **
  • Posts: 82
    • View Profile
Re: Mike Montieth has done it !
« Reply #6 on: March 08, 2007, 11:43:16 PM »
Mike has ALWAYS supported me and my engine with any issues (and there aint been many) that I may have had.

Doug

  • Hero Member
  • *****
  • Posts: 3386
  • Why don't pictures ever work for me?
    • View Profile
    • Doug's Petteroid Stuff
Re: Mike Montieth has done it !
« Reply #7 on: March 08, 2007, 11:48:51 PM »
I've been verry critical of supliers.

I still want to know who invented the fly wheel lol.

Doug

All kidding aside I have no list on the GM 90 for serial numbers or pictures. GM90 owners don't seem to have as many problems and verry few complaints ( I can't even pull a reference up of anyone who told me they're GM 90 was a let down.

I wish Jack had a GM 90 to yard stick against his JKson and Prakah Listers. Things lke lube oil and fuel consumption, cold starting and wear would be very nice too see ( Prakash low end JKson high end ) VS the New style GM90
It's a Good Life, If You Don't Weaken

hotater

  • Hero Member
  • *****
  • Posts: 1557
    • View Profile
Re: Mike Montieth has done it !
« Reply #8 on: March 10, 2007, 02:53:07 PM »
Quote
I wish Jack had a GM 90 to yard stick against his JKson and Prakah Listers.

I'll pour the concrete......
7200 hrs on 6-1/5Kw, FuKing Listeroid,
Currently running PS-Kit 6-1/5Kw...and some MPs and Chanfas and diesel snowplows and trucks and stuff.

sparky196969

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: Mike Montieth has done it !
« Reply #9 on: March 15, 2007, 11:30:33 PM »
hi

am new here. what i would like to know is who makes the GM90?

thanks

Darrell

wrightkiller

  • Hero Member
  • *****
  • Posts: 843
    • View Profile
Re: Mike Montieth has done it !
« Reply #10 on: March 16, 2007, 01:43:16 AM »
Darrell:

GM-90 hybrid models, Satyajeet brand built by Sensitive Industries.¬  these are the ones¬  ¬ Mike Montieth sales

alternateenergy@bellsouth.net        http://www.listeroids.com/
« Last Edit: March 16, 2007, 01:46:12 AM by wrightkiller »