In another thread, I spoke about the ST power not powering my house properly. In particular my APC NS 1050 and APC back pro 1100 will not tolerate ST/Lister power.
It seems the 1050 has a voltage sensitivity adjustment. The 1100 is supposed to auto condition power, even during a brownout. Neither seems very good at it's job.
So, has anyone here had success adjusting APC UPS's when using ST power?
Is there a different brand I should consider? How about some form of line power conditioner (transformer?) placed before these UPS's?
Suggestions please!
Note: I run at exactly 60HZ under load, I have extra heavy flywheels on my 20/2, I have the 70 pound extra heavy gen head pulley, the governor linkage is fully heim, the gov spring is able to control freq within 1-2 from no load to full load. My loads are generally steady.
Chris