Drilled dippers, is anyone selling them?

[biobill]

I'd take 3, Metro, splash only. If you get enough orders you could farm it out to India .   Bill

[Doug]

Thats no deal for the tap....

Rastal Nut and bolt offeres new 5/16 BSF for about 17 dollars Canadian at the store and you don't have to wait.

Doug

[xyzer]

You may have to go to coppermine to get a better view!

Modify this "QUOTE" with your order

Ordered By:          Dipper type:          Qty:
-----------------------------------------------------------------
XYZER                  3"(long)                   1
XYZER                  2.5"?(short)             1
biobill                    3"                           3
wrightkiller            3"                            2
agmxv                  3"                            1






"Quote" and modify with you order.
I haven't come up with a price yet but this will give me an Idea of quanity.I will know more next week.
Lets see what kind of quanity we are looking at then I'll figure the price shipping and all that stuff.

Dave   

[BruceM]

Here's my addition:
Modify this "QUOTE" with your order

Ordered By:          Dipper type:          Qty:
-----------------------------------------------------------------
XYZER                  3"(long)                   1
XYZER                  2.5"?(short)             1
biobill                    3"                           3
wrightkiller            3"                            2
agmxv                  3"                            1
brucem                3"                            2

[Tom]

Here's my addition:
Modify this "QUOTE" with your order

Ordered By:          Dipper type:          Qty:
-----------------------------------------------------------------
XYZER                  3"(long)                   1
XYZER                  2.5"?(short)             1
biobill                    3"                           3
wrightkiller            3"                            2
agmxv                  3"                            1
brucem                3"                            2
Tom                    3"                            1

[wldhoss]

Here's my addition:
Modify this "QUOTE" with your order

Ordered By: Dipper type: Qty:
-----------------------------------------------------------------
XYZER 3"(long) 1
XYZER 2.5"?(short) 1
biobill 3" 3
wrightkiller 3" 2
agmxv 3" 1
brucem 3" 2
Tom 3" 1
wldhoss 2.5"(short)  2

[xyzer]

Here's my addition:
Modify this "QUOTE" with your order

Ordered By:          Dipper type:          Qty:
-----------------------------------------------------------------
XYZER                  3"(long)                   1
XYZER                  2.5"?(short)             1
biobill                    3"                           3
wrightkiller            3"                            2
agmxv                  3"                            1
brucem                3"                            2
Tom                    3"                            1
wldhoss                2.5"(short)                2

Note: Short guys (2.5")  If these are for a 6/1 they will be help alot. If it is a 8/1(not real sure) or bigger and  you have a centrifical oil slinger you already have plenty of oil but they will still help out espessialy if you have a pump failure.

[binnie]

xyer,
Sent a message to the forum that I would like 3 ot the shorter models for a Jkson 12/2 powersolutions...but don't see it there. Probably went off into cyberspace like so many others! Please e-mail me direct with costs & shipping... dunhill@sympatico.ca Thanks binnie
This can only be a plus....

[xyzer]

Modify this "QUOTE" with your order

Ordered By:          Dipper type:          Qty:
-----------------------------------------------------------------
XYZER                  3"(long)                   1
XYZER                  2.0"(short)               1
biobill                    3"                           3
wrightkiller             3"                           2
agmxv                  3"                            1
brucem                 3"                            2
Tom                     3"                            1
wldhoss                 2.0"(short)               2
binnie                    2.0"(short)               3
cuejet                   2.0"(short)               4


Note: 1- Short guys (2.0")  If these are for a 6/1 they will be help alot. If it is a 8/1(not real sure) or bigger and  you have a centrifical oil slinger you already have plenty of oil but they will still help out espessialy if you have a pump failure.

Note: 2- As we all know these were made in India...Anyone that can get a OAL measurement on the short version would help. I have one but just need a verification that they made 2 of them the same! Mine measures 2.01 OAL.

Note: 3- I will let you all know what the price will be next week. I will either have a shop that does work for me on the side or if we have a machine open at work I will make them.   

[cujet]

I could use at least 4 short drilled dippers.

Chris

[rpg52]

Put me down for one for my PS 6-1.  I'll try to measure it in a day or so.  Thanks,
Ray

[skeeter]

I have a PS 12/2 with solid dippers. If I change to drilled dippers, should I block off the top bearing holes? What is everyone else doing.

[xyzer]

I have a PS 12/2 with solid dippers. If I change to drilled dippers, should I block off the top bearing holes? What is everyone else doing.

I didn't and don't suggest it. The more oil the better!

[xyzer]

Modify this "QUOTE" with your order

Ordered By:          Dipper type:          Qty:
-----------------------------------------------------------------
XYZER                  3"(long)                   1
XYZER                  2.0"(short)               1
biobill                    3"                           3
wrightkiller             3"                           2
agmxv                  3"                            1
brucem                 3"                            2
Tom                     3"                            1
wldhoss                 2.0"(short)               2
binnie                    2.0"(short)               3
cuejet                   2.0"(short)               4
rpj52                     TBD "will measure"     1


Note: 1- Short guys (2.0")  If these are for a 6/1 they will be help alot. If it is a 8/1(not real sure) or bigger and  you have a centrifical oil slinger you already have plenty of oil but they will still help out espessialy if you have a pump failure.

Note: 2- As we all know these were made in India...Anyone that can get a OAL measurement on the short version would help. I have one but just need a verification that they made 2 of them the same! Mine measures 2.01 OAL.

Note: 3- I will let you all know what the price will be next week. I will either have a shop that does work for me on the side or if we have a machine open at work I will make them.   

[xyzer]

Modify this "QUOTE" with your order

Ordered By:          Dipper type:          Qty:
-----------------------------------------------------------------
XYZER                  3"(long)                   1
XYZER                  2.0"(short)               1
biobill                    3"                           3
wrightkiller             3"                           2
agmxv                  3"                            1
brucem                 3"                            2
Tom                     3"                            1
wldhoss                 2.0"(short)               2
binnie                    2.0"(short)               3
cuejet                   2.0"(short)               4
rpj52                     TBD "will measure"     1


Note: 1- Short guys (2.0")  If these are for a 6/1 they will be help alot. If it is a 8/1(not real sure) or bigger and  you have a centrifical oil slinger you already have plenty of oil but they will still help out espessialy if you have a pump failure.

Note: 2- As we all know these were made in India...Anyone that can get a OAL measurement on the short version would help. I have one but just need a verification that they made 2 of them the same! Mine measures 2.01 OAL.

Note: 3- I will let you all know what the price will be next week. I will either have a shop that does work for me on the side or if we have a machine open at work I will make them.   

Here is the price for the dippers only. (no lock nuts)

$16.50US ea. 1st one.
$13.00US ea. for extras at time of order.

The price will include shipping. Canadians .... I will still try to include the shipping unless the cost is extreme....I haven't checked.
It will be a week or 2 till they are done.
If you are still interested PM me with your order, size, quanity, mailing address and any questions. I will PM you with my mailing address for payment. I guess I have a paypal account it may out easier?!
Dave