Lister Engines > Petteroids
Petter Industrial Engine Data Sheets
guest23837:
Make a donation to the internal fire museum and they will be happy to supply it via email
sirpedrosa:
Hi Jhondoh
Is there a chance somebody of this comunity to share it?
BR
VPedrosa
sirpedrosa:
Greetings my good fellows
I'm wondering again if there is a good soul, that can tell me the tightening torque of the nut (20) to the pump body.
Best regards to all
Pedrosa
EdDee:
Hi Pedrosa,
FWIW, I tend to under-tighten things on pipes and pumps, get the unit operating, then nip them up a little at a time until leaks stop...
Regds
Ed
dieselspanner:
+1 for Ed, once you've got a feel for the joint concerned and it won't stop leaking strip it down and rebuild with a hydraulic sealant, Loctite 542 or similar.
Remember spanners are made to a certain length, proportional to their size, this is to help prevent over enthusiastic tightening!
Combination spanners allow the wise engineer (and evil bastards, such as my self) the luxury of clipping two together to double the force in times of dire emergency............
Cheers
Stef
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version