Hoffberg 10kW and 3phase wiring diagram

[IvandC]

Need help please. I just started to rebuild a VERY nice Lister ST3 with direct-coupled Hoffberg generator alternator.
The PO had disconnected the wires coming from the windings and brushes from the connector box on-top of the Hoffberg, and removed the box.
All the diagrams that I found on the forum are for generators up to 5kW but nothing for a 10kW Hoffberg.
Can someone please help and possible give me some guidelines for fitting a AVR?

[dax021]

Hi Ivan, I don't think you are going to get much info on Hoffberg from the forum.  Most of the members are in Europe or the States, and that alternator is a SA'n build.  I have a 4kw version on my SR2

[IvandC]

Thank you very much - good advice. I'll try to find a local electrician to do the wiring.

[dax021]

Where are you?  I'm in Knysna.  There used to be a boffin on this forum from East London, name of Ed, but he hasn't been around for a long time.  Not many SA'ns here, a few have come and gone. 

[IvandC]

Good Morning. I'm based in Pretoria and have some help from VoltAmpere, but so far, nothing yet on the 3phase 10kva Hoffberg.

[dax021]

Hi Ivan, when you find anything on these alternators please share.  I too would like to spruce mine up