121
Engines / Re: SR2 starter replacement
« on: February 19, 2022, 09:09:02 PM »
Original spacer set on new ... I think it's too thick for my new ...
Home of the Listeroid - Since 2005
News:
Don't forget to check out the LEF Gallery! Exclusively for LEF members, an ideal alternative to Photobucket, Flickr, etc. It's FREE, and best of all totally AD FREE! Just click the link!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
122
Engines / Re: SR2 starter replacement
« on: February 14, 2022, 05:05:02 PM »
Still tryingto find a rig spacer ....
The starter I last received seems correct ... just sitting too deep into flywheel
The starter I last received seems correct ... just sitting too deep into flywheel
I can see the image:
https://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313&_nkw=133970436456&_sacat=0
Yes from the picture, that looks to be what to be what your looking for.
However, be aware of the following:
1) Ensure the direction of rotation of the starter motor is correct, as Lister's definition of direction of rotation has caught many people over the years (NOTE! If your engine serial number has SR2A, the A indicates anti clockwise rotation)
2), You will need a spacer to go between the starter motor and bell housing, like so:
https://www.ebay.co.uk/itm/265239226729?hash=item3dc17d6969:g:evoAAOSwdjVg-bIX
This is for the HA series that use the Lucas CA45 starter motor, but the general shape is very similar to the SR engine.
3), Finaly confirm that the number of teeth on the bendix is correct.
123
Engines / Re: SR2 starter replacement
« on: February 12, 2022, 08:04:37 PM »
Wich way is operate and idle?
124
Engines / Re: SR2 starter replacement
« on: February 12, 2022, 07:59:45 PM »
Ok, im to the point that the roatation and tooth count is correct ...
I need the spacer ... but will the original studs be the correct length or will they need replaced with different lengths?
I already broke one stud off removing the original starter.
I need the spacer ... but will the original studs be the correct length or will they need replaced with different lengths?
I already broke one stud off removing the original starter.
I can see the image:
https://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313&_nkw=133970436456&_sacat=0
Yes from the picture, that looks to be what to be what your looking for.
However, be aware of the following:
1) Ensure the direction of rotation of the starter motor is correct, as Lister's definition of direction of rotation has caught many people over the years (NOTE! If your engine serial number has SR2A, the A indicates anti clockwise rotation)
2), You will need a spacer to go between the starter motor and bell housing, like so:
https://www.ebay.co.uk/itm/265239226729?hash=item3dc17d6969:g:evoAAOSwdjVg-bIX
This is for the HA series that use the Lucas CA45 starter motor, but the general shape is very similar to the SR engine.
3), Finaly confirm that the number of teeth on the bendix is correct.
125
Engines / Re: SR2 starter replacement
« on: February 10, 2022, 07:25:29 PM »
Hey, ... a simple question,...
Which is normal slow position?
On the speed controll has only two positions... hooked and, well not.
Which is normal slow position?
On the speed controll has only two positions... hooked and, well not.
126
Lister Market Place (things for Sale) / Craigslist add
« on: February 04, 2022, 11:28:22 AM »
https://providence.craigslist.org/grd/d/north-kingstown-lister-sl-air-cooled/7429421291.html
East Coast Lister, looks like 450$
Hope this is ok to post here ...
East Coast Lister, looks like 450$
Hope this is ok to post here ...
127
Engines / Re: SR2 starter replacement
« on: February 04, 2022, 06:57:55 AM »What is all that white stuff in the pictures? Are you near the ocean / salt spray ??
Ha .. ok,
It was 6 Deg F when i took these pictures in the morning ... it was frost falling out of the sky -- kinda like snow but not ....
The picture of the badge/IdPlate has frost on it too ... not rust
128
Engines / Re: SR2 starter replacement
« on: February 04, 2022, 04:33:37 AM »
I used a magic marker to count the teeth of the original ..(was quite rusted)
Count was 10 ... im sure of it. The one delivered was 11 ... so I started a return ... im sure its not the right one.
Count was 10 ... im sure of it. The one delivered was 11 ... so I started a return ... im sure its not the right one.
131
Engines / Re: SR2 starter replacement
« on: February 02, 2022, 05:53:39 PM »
I used one of my kids tires to help show the rotation
https://youtu.be/qAhAz9bxmOY
What do you think of that Heather Boyd
https://youtu.be/qAhAz9bxmOY
What do you think of that Heather Boyd
132
Engines / Re: SR2 starter replacement
« on: February 02, 2022, 12:17:32 PM »
This is the plate number
6354SR2A 23
6354SR2A 23
135
Engines / Re: SR2 starter replacement
« on: February 01, 2022, 01:09:00 PM »
I dont think it needs an adapter ...
Cone height is 1/2" Longer than original, and teeth are 1/4" longer
I did ask the Seller .. all he responded with was dimensions .. ignoring the question of CCW / CW rotation
Cone height is 1/2" Longer than original, and teeth are 1/4" longer
I did ask the Seller .. all he responded with was dimensions .. ignoring the question of CCW / CW rotation