1
Listeroid Engines / Re: RPM ISSUE ON LISTER CS. INDIA
« on: August 24, 2021, 05:35:21 PM »
Yes, it will go off, and initially the lister is misfiring, have increase the pump tappet, cylinder, the piston ring is closed, still the same.
Home of the Listeroid - Since 2005
News:
Don't forget to check out the LEF Gallery! Exclusively for LEF members, an ideal alternative to Photobucket, Flickr, etc. It's FREE, and best of all totally AD FREE! Just click the link!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Listeroid Engines / Re: RPM ISSUE ON LISTER CS. INDIA
« on: August 24, 2021, 01:04:11 PM »
Yes but the speed is high
3
Listeroid Engines / RPM ISSUE ON LISTER CS. INDIA
« on: August 24, 2021, 08:15:33 AM »
What can make lister cs engine speed not stable, within the 2 minutes it will high and low it speed. Have check the cam shaft governor, linkage, change the element inside pump, still the the same, pump is creaking.
4
Original Lister Cs Engines / A lot of issue on lister cs
« on: August 22, 2021, 08:10:12 PM »
I recently overhauled lister 8hp, I changed the element, nozzle, rings but since then have been having issue of misfiring, even the rpm is not normal, the engine raise and low it self, and I could hear sound of nozzle, I have adjusted the pump lifter but still the same.
And after that I adjusted the fuel pump tappet and I heard some noise inside the engine like Connecting rod stuff which make me think may be the spill timing is too advanced.
I opened the the engine, but nothing happen to the Connecting rod but I found abnormal thing on the camshaft gear, the pin they used to hold the gear has came off and also to gear hole is not aligned with camshaft they have changed the gear before.
And also please what could be the reason for crankshaft to be moving in and out.
And after that I adjusted the fuel pump tappet and I heard some noise inside the engine like Connecting rod stuff which make me think may be the spill timing is too advanced.
I opened the the engine, but nothing happen to the Connecting rod but I found abnormal thing on the camshaft gear, the pin they used to hold the gear has came off and also to gear hole is not aligned with camshaft they have changed the gear before.
And also please what could be the reason for crankshaft to be moving in and out.
Pages: [1]