916
General Discussion / Re: Smoking/Ecigs (split from: Losing the will .....)
« on: September 30, 2018, 11:29:20 AM »
Johndoh
Said that way I take my hat off...
BR
Pedrosa
Said that way I take my hat off...
BR
Pedrosa
Home of the Listeroid - Since 2005
News:
Don't forget to check out the LEF Gallery! Exclusively for LEF members, an ideal alternative to Photobucket, Flickr, etc. It's FREE, and best of all totally AD FREE! Just click the link!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
917
General Discussion / Re: Smoking/Ecigs (split from: Losing the will .....)
« on: September 30, 2018, 09:04:43 AM »
Now you pretty much come out and berate people for not giving you what you want in the manner you demand it.
It seems to escape you that peoples help here or any other site is VOLUNTARY. You get it great, you don't, well there is no obligation on anyones part.
Do what the rest of us have to do and figure it out for yourself it you can't or are not prepared to find the info you want. It's called learning.
I apologize to everyone if I was misunderstood.
I do not want to force anyone to do anything. The notion I have of the forum is that anyone has more knowledge than I do.
I have no aspiration of arrogance at all.
Understand that the question of potatoes was to begin to adapt to the status quo of the forum, at least I wondered how to break the ice.
I wish a sunny Sunday for everyone.
Pedrosa
918
Original Lister Cs Engines / Re: Resurrection of a Lister 12/2
« on: September 30, 2018, 08:44:02 AM »
Hello glort
If in life it was all about money, half the world did not exist.
Perhaps the word comrade, solidarity, philanthropy, and so many others that helped the human being to leave the middle age. where there were only two types of people: the master and the slave.
If this forum is not for the network of knowledge, then what will it serve? to do business???
So who publishes in this forum is not bound to achieve its objective? which is the global knowledge network.
I believe that this forum has nothing to do with complaints or with the courts, because for this I could spend 5000 characters with prose every time I pronounce on a topic.
I just ask simple things, for simple problems and with simple answers: can anyone help with a simple manual?
Whoever has the manual and wants to share it very well.
I think this will be the spirit of this forum ...
Cheers
Pedrosa
If in life it was all about money, half the world did not exist.
Perhaps the word comrade, solidarity, philanthropy, and so many others that helped the human being to leave the middle age. where there were only two types of people: the master and the slave.
If this forum is not for the network of knowledge, then what will it serve? to do business???
So who publishes in this forum is not bound to achieve its objective? which is the global knowledge network.
I believe that this forum has nothing to do with complaints or with the courts, because for this I could spend 5000 characters with prose every time I pronounce on a topic.
I just ask simple things, for simple problems and with simple answers: can anyone help with a simple manual?
Whoever has the manual and wants to share it very well.
I think this will be the spirit of this forum ...
Cheers
Pedrosa
919
Original Lister Cs Engines / Re: Resurrection of a Lister 12/2
« on: September 30, 2018, 12:42:34 AM »
Hi all
Just an update of patatos harvest (cleaned and sorted), while 12/2 parts are in bath.
BR
Pedrosa
Just an update of patatos harvest (cleaned and sorted), while 12/2 parts are in bath.
BR
Pedrosa
920
General Discussion / MANUALS OF ALL KIND OF STATIONARY ENGINES
« on: September 30, 2018, 12:25:27 AM »
Greetings Everyone
following the advice of the 38AC, here is open the topic to serve as pool knowledge of engine manuals.
Anyone who needs a manual can ask for it here, and someone who has manuals can share them here, preferably in pdf format.
BEST REGARDS
Pedrosa
Ps: I still need that Petter PAZ1 Instruction Book
following the advice of the 38AC, here is open the topic to serve as pool knowledge of engine manuals.
Anyone who needs a manual can ask for it here, and someone who has manuals can share them here, preferably in pdf format.
BEST REGARDS
Pedrosa
Ps: I still need that Petter PAZ1 Instruction Book
921
General Discussion / Re: Smoking/Ecigs (split from: Losing the will .....)
« on: September 29, 2018, 11:43:11 PM »
Hi 38AC
Again you did not disappoint.
And again I repeat that I have had better expectations of the forum. If it does not serve to share information, then what will it serve?
And once again I have nothing to sell, neither manuals, and if I had it, it will already been in pdf to send the one that needed them.
I'll start that treath.
Kind regards
pedrosa
Again you did not disappoint.
And again I repeat that I have had better expectations of the forum. If it does not serve to share information, then what will it serve?
And once again I have nothing to sell, neither manuals, and if I had it, it will already been in pdf to send the one that needed them.
I'll start that treath.
Kind regards
pedrosa
922
General Discussion / Re: Smoking/Ecigs (split from: Losing the will .....)
« on: September 29, 2018, 04:49:13 PM »
Guys, guys... helloooooooooooooo
I'm relying on your knowledge... please come back to earth.
I got a Petter and the 12/2 to get straigth.
you know too much to walk with gerontine discussions. what you know is worthless. Of course all machines have an end, including ours. Are not interested in passing this knowledge on to the younger ones? (since Monday I'm fifty).
Now I'm here "on the left side of the moon" and I can not get the knowledge - globally - because www allowed strangers to become known, and even in some cases friends.
Do not you consider the value to have an older engine than I am and to be trying to get it back to life?
I also take tablets for hypertension, + 3 herniated discs, and anything else I still do not know yet.
I still know very little of listers and Petters compared to you. I need your precious help.
I'll stop writing to not steal the poet's license to Glort.
Cheers
Pedrosa
I'm relying on your knowledge... please come back to earth.
I got a Petter and the 12/2 to get straigth.
you know too much to walk with gerontine discussions. what you know is worthless. Of course all machines have an end, including ours. Are not interested in passing this knowledge on to the younger ones? (since Monday I'm fifty).
Now I'm here "on the left side of the moon" and I can not get the knowledge - globally - because www allowed strangers to become known, and even in some cases friends.
Do not you consider the value to have an older engine than I am and to be trying to get it back to life?
I also take tablets for hypertension, + 3 herniated discs, and anything else I still do not know yet.
I still know very little of listers and Petters compared to you. I need your precious help.
I'll stop writing to not steal the poet's license to Glort.
Cheers
Pedrosa
923
Original Lister Cs Engines / Re: Resurrection of a Lister 12/2
« on: September 29, 2018, 01:26:54 PM »
Hi Bob
I like them in the basement before someone takes them before me, like the peppers did (a two-legged rat took them before me).
Today I piked up thoes left, I think the two rows should give 70kg.
I like them even raw, just without peel.
to prevent they do not spread just change the foliage from one side of the row to the other once a month (i think).
Do you believe that until now I still have not gotten the help asked for Petter?
Cheers.
Pedrosa
Ps: the big ones where on the right row
I like them in the basement before someone takes them before me, like the peppers did (a two-legged rat took them before me).
Today I piked up thoes left, I think the two rows should give 70kg.
I like them even raw, just without peel.
to prevent they do not spread just change the foliage from one side of the row to the other once a month (i think).
Do you believe that until now I still have not gotten the help asked for Petter?
Cheers.
Pedrosa
Ps: the big ones where on the right row
924
Original Lister Cs Engines / Re: Resurrection of a Lister 12/2
« on: September 28, 2018, 10:43:52 PM »
Updating the patato
1,333kg
1,333kg
925
Original Lister Cs Engines / Re: Resurrection of a Lister 12/2
« on: September 28, 2018, 09:39:06 PM »
Greetings Everyone
The 2 Lister's CAV IP's are primed, and the Petter's Bryce too. All other parts rusted "are bathing" in the oxalic acid. And 2 bits os truck parabolic spring are ready to go to the cuting machine to make the gibkey puller.
Fingers crossed!
BR
Pedrosa
PS: Today I collect some of my 2 rows of sweet potatoes. The first one is amazing, take a look!
The 2 Lister's CAV IP's are primed, and the Petter's Bryce too. All other parts rusted "are bathing" in the oxalic acid. And 2 bits os truck parabolic spring are ready to go to the cuting machine to make the gibkey puller.
Fingers crossed!
BR
Pedrosa
PS: Today I collect some of my 2 rows of sweet potatoes. The first one is amazing, take a look!
926
Original Lister Cs Engines / Re: Resurrection of a Lister 12/2
« on: September 27, 2018, 12:02:46 PM »
Hi Bob
Nice to hear from you.
That nut is soft steel. it will ruins in a glance. I all ready soak it a lot, put it in the oven 1H @ 200ºC, soak it again, but it stills stuck.
I only use blowlamp in exausts or something rough. hammers and injectors are not friends at all.
I'll try to get an hex nut to screw in the spring nut, with a counter nut. By now is the only idea that occurs to me to not damage the spring nut.
By the way, the oxalic acid is good to derust. I tried on a few masonry spoons, they get black color but no rust. need to stay some time (3/4 days...). the metal was not attacked. next experience ... electrolysis
Cheers
Pedrosa
Nice to hear from you.
That nut is soft steel. it will ruins in a glance. I all ready soak it a lot, put it in the oven 1H @ 200ºC, soak it again, but it stills stuck.
I only use blowlamp in exausts or something rough. hammers and injectors are not friends at all.
I'll try to get an hex nut to screw in the spring nut, with a counter nut. By now is the only idea that occurs to me to not damage the spring nut.
By the way, the oxalic acid is good to derust. I tried on a few masonry spoons, they get black color but no rust. need to stay some time (3/4 days...). the metal was not attacked. next experience ... electrolysis
Cheers
Pedrosa
927
Original Lister Cs Engines / Re: Resurrection of a Lister 12/2
« on: September 26, 2018, 02:30:53 PM »
Greetings Everyone
I need help, please. My body of 2 BKB injectors which has the very tight spring nut (4) and has no hexagonal shape to unscrew it, but only two notches for wrench, which can not unscrew them without damaging.
BR
Pedrosa
I need help, please. My body of 2 BKB injectors which has the very tight spring nut (4) and has no hexagonal shape to unscrew it, but only two notches for wrench, which can not unscrew them without damaging.
BR
Pedrosa
928
General Discussion / Re: Todays whinge rant.
« on: September 24, 2018, 01:14:10 PM »
Hi Glort
It's almost impossible to follow you.
Very pragmatic, very learned. almost an encyclical. And long, very long, when we reach the end we can no longer see how it began.
So it's not easy to keep up ...
Cheers
VP
It's almost impossible to follow you.
Very pragmatic, very learned. almost an encyclical. And long, very long, when we reach the end we can no longer see how it began.
So it's not easy to keep up ...
Cheers
VP
929
Original Lister Cs Engines / Re: Resurrection of a Lister 12/2
« on: September 23, 2018, 11:23:38 PM »
Greetings Everyone
Another sunday "promenade" to the shed visiting the 12/2, taking off injectors (wonderfull shape), join them to other stuff in the basket and bring all to the "cave" to start the derust "chemical and/or electrical" to see the best results.
Fingers crossed!
Good week to all.
BR
Pedrosa
Another sunday "promenade" to the shed visiting the 12/2, taking off injectors (wonderfull shape), join them to other stuff in the basket and bring all to the "cave" to start the derust "chemical and/or electrical" to see the best results.
Fingers crossed!
Good week to all.
BR
Pedrosa
930
Original Lister Cs Engines / Re: Resurrection of a Lister 12/2
« on: September 19, 2018, 01:50:19 PM »
Hi Bob
thank you for your always appreciated advice.
For each piece I have a box or tin for, as there are no exchanges of pieces.
By the send picture of that "burned end of a wooden kebab stick".
I made some research and I find that the rust can be removed with oxalic acid "https://en.wikipedia.org/wiki/Oxalic_acid".
What is your opinion?
cheers
Pedrosa
thank you for your always appreciated advice.
For each piece I have a box or tin for, as there are no exchanges of pieces.
By the send picture of that "burned end of a wooden kebab stick".
I made some research and I find that the rust can be removed with oxalic acid "https://en.wikipedia.org/wiki/Oxalic_acid".
What is your opinion?
cheers
Pedrosa