Puppeteer

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - sirpedrosa

Pages: 1 ... 54 55 [56]
826
Original Lister Cs Engines / Re: Resurrection of a Lister 12/2
« on: August 16, 2018, 01:28:12 AM »
Greetings my good fellows

I started the new thread of my PETTER PAZ1 here: http://listerengine.com/smf/index.php?topic=8333.msg95728#new

Fell free to enjoy.

Best regards to all
Pedrosa

827
Petteroids / Re: PETTER - PAZ1 - New project
« on: August 16, 2018, 01:05:48 AM »
At some point I realized that transpiration wasn't enough to fulfil the task, therefore I took a break to inspiration (see foto). Please note the important is that I cannibalized my 10 year ago hidrolizer project, because it has the BSP right to fit the injection pump.
Fell free to watch the video.https://drive.google.com/file/d/1dhZgPIi0LQkGf44bzjQNN_2lnCSRJu4g/view?usp=sharing

See you later.
Pedrosa

828
Petteroids / PETTER - PAZ1 - New project
« on: August 16, 2018, 12:51:38 AM »
Greetings my good fellows

I'm starting this new  thread here because I did not find another more precise to make known the progress of this new project.

I took this afternoon to see if my "new" PAZ1 could be resurrected.

The bad news: fuel tank with a huge hole.

To do: disassemble the fuel line; improvise a temporary line (see photo - final version); bleed (+320 crank turns) the bubbles never stopped ... and finally it is alive.
Next step: disassembly, sandblasting, straightening plates, primer and paint.

Difficulties today: lack of English spanners. Once more improvising.

I'll post the project advance.

Best regards to all
Pedrosa


829
Original Lister Cs Engines / Re: Resurrection of a Lister 12/2 - meanwhile a Petter PAZ1
« on: August 14, 2018, 11:25:13 PM »
My dear friends

Do not get me wrong but I said earlier that I was going to take baby steps.

The historic rivalry between RA Lister and the Petter brothers can not fail to honor both in contributing to the advancement of technology.

So I looked for an acceptable price machine to honor the Petter brothers too, and today I went to get a PAZ1.

Not working because it is dry. In a few days I give him a drink to see if he is resuscitated.

At first glance it has good compression, but the blower casing accuses the hard work of moving a cement mixer for a few years. It has some patches and a lot of welds.

Here are some pictures. Please be complacent because this is not the right place, and as soon as possible I will open a new thread in the right place - even because I need help and literature.

It seems to me to have been a good deal. The cost of going fetch it and the temporary wheelbase, is already higher than the cost of the machine.

Now I need your support with the workshop manual for disassembly and assembly this PAZ1.

However the 12/2 is not forgotten, but it needs more manpower.

Best Regards to All
Pedrosa

830
Original Lister Cs Engines / Re: lister fr 2 cilinder 16hp
« on: August 09, 2018, 12:04:05 AM »
Hi M60...

Welcome to the (gray) club of Lister enthusiasts.
It's feels good to know there is abroad so many enthusiasts. And the common question is: "Someone loan me the manual!". Awesome.

I started in the same zero mile stone. With a CS 12/2 [http://listerengine.com/smf/index.php?topic=8320.0]. (After the: New member thread - http://listerengine.com/smf/index.php?topic=6214.45)

Now I'm in the stage of baby steps.

As far of my experience the ("insane" wisdom of this) community of this forum will not let you down.

Belissimo.
Pedrosa (PT)

831
Original Lister Cs Engines / Re: Resurrection of a Lister 12/2
« on: August 07, 2018, 01:36:55 PM »
Many thanks MikeNash

More good stuff to burn eyelashes.

Br
Pedrosa

832
Original Lister Cs Engines / Re: Resurrection of a Lister 12/2
« on: August 06, 2018, 11:21:14 PM »
Greetings everyone

I would like to publicly acknowledge the support already given by BroncoDriver99.

See you later.
Pedrosa

833
Original Lister Cs Engines / Re: Resurrection of a Lister 12/2
« on: August 06, 2018, 08:20:20 PM »
Hello Casey,

I recognize the 12/2 is a little beast (above 500kg), but this project means at lest to preserve history of my toddler time, as I had spent countless hours earring that POP/POP in my birth village.
But a single does't get out of my mind. One at time.

Please clarify me about that recipie of ATF/Acetone issues.

BR
Sirpedrosa

834
Original Lister Cs Engines / Re: New member
« on: August 06, 2018, 04:32:28 PM »
Thank you all kindly.

I opened the new thread here: http://listerengine.com/smf/index.php?topic=8320.0

835
Original Lister Cs Engines / Re: Resurrection of a Lister 12/2
« on: August 06, 2018, 04:18:52 PM »
I forgot,

Is missing also the return fuel line (was stolen cut, due the copper/brass), and the starting handle is somewhere that the owner don't remember.

Best Regards
Sirpedrosa

836
Original Lister Cs Engines / Resurrection of a Lister 12/2
« on: August 06, 2018, 03:20:45 PM »
Hello everyone

Following Tiger's advice, here's a new 12/2 topic.

This Sunday was a day to visit the old machine. (Acquisition under discussion) Due to not deteriorate much more, it was all sprayed with WD40 - for now - I will experiment later on the ATF / acetone.

Bad news are: the whole system of governor seized with rust;
a fuel pump element seized with rust;
the two intake Tappets seized with rust.

All this at the first glance.

It's going to be a lot of work.

I kindly ask to anyone in this forum the 12/2 manual in pdf format.

837
Original Lister Cs Engines / Re: New member
« on: August 04, 2018, 03:01:14 PM »
Thanks in advance to Tiger
As I said I'm a Lister Noob entusiast, and I need to know what means "WOK pages drill to 38AC".
Please do not mok me because my ignorance.
I realy need the highlight to this endeavour.
So please be kind with me. I'll report to everybody the ongoing works.
Best Regards to all, and GWE.
I'm looking to this engine on foto.
Sirpedrosa

838
Original Lister Cs Engines / Re: New member
« on: August 03, 2018, 10:04:03 PM »
Hello everyone
As I am a new member, I think I should start with this topic.
I'll apologize right away for my written English, which has a lot of google translator.
My passion for Lister began a short time ago, when I restored my mother's irrigation engine, which she bought when I was born (50 years ago). A Bernard 18A who is now working again.
Now I'm looking for a Lister 12/2 of 1957, which has not worked for more than 25 years.
I need help getting the manual of this engine to start studying.
BR
sirpedrosa

Pages: 1 ... 54 55 [56]