136
Changfa Engines / R170Bs on Ebay for sale
« on: July 20, 2011, 04:41:17 PM »
.
Home of the Listeroid - Since 2005
News:
Don't forget to check out the LEF Gallery! Exclusively for LEF members, an ideal alternative to Photobucket, Flickr, etc. It's FREE, and best of all totally AD FREE! Just click the link!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
138
Generators / What type of head is this?
« on: July 20, 2011, 02:50:01 AM »
Picked up a Chinese generator today and thought it was a 5KW ST but tag said brushless. Removed the band and sure enough is brushless. What supprized me even more was I pulled the top off the dog house and other than a capacitor looking devise there is nothing in there that isn't in an ST. I though brushess heads all had some type of electronic regulator? A pic of the tag for those who know more than me (which is everyone) An overall picture of the unit is on the changfa forum here.
139
Original Lister Cs Engines / Lister 6/1 restored
« on: June 30, 2011, 03:22:55 AM »
Thought you all would be interested to see the 1938 6/1 completed. This is one of the engines we picked up at George Helmuth's estate auction last October. It would turn over as purchased so nothing could be too wrong inside right?? Ha! it ended up being a mess inside so nothing short of a full overhaul would make it correct. We are blessed to be able to do the work in house, even the fuel equipment which was handled by my sons. Simply amazing that it sits almost motionless on the cart even though after the video I found it to be runningh close to 700 RPM. Since been slowed down to proper 650. I hope some day to have another example to work on as I will weigh each and every part so even a listeroid can be made to sit still. The engines does not pound the ground like my Metro, the smoothness just simpoly amazes. The water and fuel tanks are sized to it's intended duty, the engine show circuit.
[youtube]9kSJ56EKZ5s[/youtube]
[youtube]9kSJ56EKZ5s[/youtube]
140
Listeroid Engines / Any Lovson air compressor updates?
« on: June 29, 2011, 01:46:31 PM »
Has anyone ordered and recieved one yet? And what was your total outlay? On the Utterpower site yesterday George had a link that shows how to get around a good bit of the importation hassles and costs with a "personal importation" deal that must be less than $2000 total billed. I had a lot of interest in these until I found the parts kits available from a member here, just curious I guess? 
141
Lister Market Place (things for Sale) / CS Listers and 'roids for sale
« on: June 06, 2011, 03:55:42 PM »
For those of you who do not frequent SmokStak here are some ads posted over the weekend
http://www.enginads.com/classifieds/showcat.php?cat=500&ppuser=11773
http://www.enginads.com/classifieds/showcat.php?cat=500&ppuser=11773
142
Changfa Engines / where to get fuel filters?
« on: May 18, 2011, 03:14:28 AM »
Guess I wanted too much for my Carroll Stream 1115 so it's going back into prime power back up. Looked all the way through my Fleetguard filter master catalog dimensional data today looking for eliments for the fuel filter and got a blank. First time that has ever happened 
. So where do you guys get filters? Or do I just get a filter head and adapt? Book says its a Changfa but I wouldn't bet anything valued on it.
. So where do you guys get filters? Or do I just get a filter head and adapt? Book says its a Changfa but I wouldn't bet anything valued on it.
145
Lister Market Place (things for Sale) / Nearly new 23 HP 1115 for sale, Midwest location
« on: March 31, 2011, 04:23:29 PM »
I have changed plans for my home generator power unit and have a nearly new 1115 23HP direct injection engine for sale. Data plate has house brand "Powermart", book says Changfa Mfg. This was the very last 1115 engine sold by Carroll Stream. It has less then 5 hours total use and currently set up with a plate and new remote radiator and thermostatically controlled electric fan. Have all parts and pieces to put back to original configuration. Spare parts kit, book and spare head gasket from GTG. The engine is well balanced and an easy starter. Engine can be purchased as is, or without radiator or as originally configured with hopper cooling, your choice. Mounted on suspended trailer frame and can be towed home if desired w/2" ball. Price is reasonable considering, but not cheap. Midwest location. Please PM or Email ac84092005@yahoo.com for more information and prices.
147
General Discussion / I wish to personaly thanks those who saved the LEF
« on: January 26, 2011, 01:46:07 PM »
D
148
Listeroid Engines / Need an exhaust flange and water flanges
« on: January 12, 2011, 05:11:51 PM »
I need the flange that bolts to the head for the exhaust and both water inlet and outlet flanges for a 6/1 'roid.
Yes, I know I can call CMD but thought I would check here first in case sombody had a parts engine or excess parts they wanted to move. Please PM if you have available.
Yes, I know I can call CMD but thought I would check here first in case sombody had a parts engine or excess parts they wanted to move. Please PM if you have available.
149
Lister Market Place (things for Sale) / CS in the U.S. on Ebay
« on: December 10, 2010, 01:08:52 PM »
Dont see this often, not mine, be interesting to see if it gets a bid with that starting price.
http://cgi.ebay.com/Lister-CS-Diesel-Engine-/110622882565?pt=LH_DefaultDomain_0&hash=item19c1a33b05
http://cgi.ebay.com/Lister-CS-Diesel-Engine-/110622882565?pt=LH_DefaultDomain_0&hash=item19c1a33b05
150
Listeroid Engines / Listeroids, better than the market or gold right now
« on: October 05, 2010, 10:56:05 PM »
.