Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Thomas

Pages: [1] 2 3 ... 5
1
Lister Based Generators / Re: Rocketboy and Cujet Hurricane Irma commentary
« on: September 10, 2017, 10:26:02 PM »
I wish I could read that long.  What was the second half about?
[/quote


nothing

2
Engines / Re: Trolley For single Cylinder DIY Generator.
« on: March 12, 2017, 10:31:12 PM »
Put it on a pallet  jack then put blocks under  it?

3
Original Lister Cs Engines / Re: DC Dynastart
« on: April 08, 2016, 04:24:40 AM »
MY mistake gentlemen, there was a car called Bond years ago, it had a motorbike type engine and a dynastart and a kick start. These were small handmade cars in the UK. Volvo marine diesels had a dynastart I believe?



You are forgiven but don't let it happen more than another million or o times  its easy to get things mixed up and the older I get the easier it is.

4
Original Lister Cs Engines / Re: DC Dynastart
« on: April 07, 2016, 01:57:06 PM »
I worked for VW as a mechanic for a few years did the line work and engine and trans rebuild  and the industrial side and never saw any thing but the conventional starter set up and there were hand crank stuff to put more than one engine in the trunk of my car went to the airport went to god knows where and changed it   

5
Original Lister Cs Engines / Re: DC Dynastart
« on: April 07, 2016, 04:16:49 AM »
The old VW beetle's had a dynastart system

When did VW use dynastart?

6
Petteroids / Re: LPW2 / DN2M compression challenge
« on: March 15, 2016, 01:46:49 PM »
Have you checked he lifters to see if they are stuck? Thomas

7
Lister Market Place (things for Sale) / Re: Rebuilt 6 to 1 on ebay
« on: February 21, 2015, 10:37:36 PM »
All I see in the back ground is the bumper of a pu and the hdy cyl of an engine lift. Thomas

8
Lister Based Generators / Re: Stamford C20B
« on: April 12, 2014, 03:46:50 AM »
I  have the Operation &Maintenance Manual for SC  and MSC234& 334& 534& 634 &734& 636 &736 frames 2,3,4,5,6,7.  Series 3AVR and Permanent Magnet Pilot.  If it will help .  Cant remember how to post a scan or I would post the cover for you. Thomas

9
Original Lister Cs Engines / Re: British Container Shipment
« on: April 06, 2014, 03:11:05 PM »
Now that it is winding down I will post what happened when I tried to get in on this at the start. I contacted the contact in England and we talked back and forth and I decided to get in so I asked about payment  and was told I could do it one of several   ways I know some one who lives there so had them set it up to meet the man sent them the money to pay him and inspect the unit they went to  the  address no one there after a few tries to find him they gave up we decided it was a scam they sent my money back looking back was for the best. It cost me to transfer the money but a lot less than if I had just sent the money like he wonted. I thought maybe  my people had just missed making contact. Thomas

10
Listeroid Engines / Re: Listeroid 20/2 heads
« on: April 04, 2014, 03:25:55 PM »
Ken how are things with you and the family? Was in Three Forks in Feb was -20 and three feet of snow could not get into the place so came back to Oregon.  Tom

11
Listeroid Engines / Re: Metro parts
« on: October 06, 2013, 08:14:44 PM »
I'm in need of a source fro parts for a Metro Premium 6/1. Anyone know who sells/sold them? Thanks, Mike




Good luck..Thomas

12
Listeroid Engines / Re: valve guide question
« on: February 11, 2013, 05:25:05 PM »
I use a air hammer on guides have for years tarted on VW heads just don't over do it.  Tom

13
Lister Based Generators / Re: Metal lathe
« on: July 16, 2012, 12:50:04 AM »
Just thought I would get in to South Bend Heavy 10 Adcock Shipely Milling machine and welder  of all make and sizes need to get something to do splines and key ways. Tom T

14
General Discussion / Re: What language is this in guys ??
« on: February 13, 2012, 01:39:39 AM »
I hank its Italian.

15
Original Lister Cs Engines / Re: inlet valve guide slipping
« on: September 20, 2011, 07:36:12 PM »
Check and see if the fost damage cracked the head in to the guide. TomT

Pages: [1] 2 3 ... 5