Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - t19

Pages: [1] 2 3 ... 63
1
Listeroid Engines / Re: How To Choose A Radiator
« on: January 09, 2024, 01:10:14 AM »
I use a rad from a dodge carivan .  Mount it above motor use huse hydrosypthon.   I alwo have a 120 volt plug in house fan the always runs ... seems to work fine

2
Listeroid Engines / Whete to find non detergent oil in canada
« on: January 09, 2024, 01:03:46 AM »
Two y

ears ago canadian tire stocked it... no longer doing so
Anyone else having this issue and if so what oil are u using?

3
Listeroid Engines / Re: decompression parts needed
« on: January 09, 2024, 01:02:11 AM »
Update.   Well that was a hell of a lot of work to take it out.  Pulling it out took a lotnof work with wedges.

Putting the new one in was an adventure but i bought a large socker to place over the part and bang it in.

Git it about half way in then removed the screw off top and finished it

Took the time to change the oil and clran up the inside with varsol... it was pretty dirrty.

Found the reason for thw brake... the rod rubbed on the new exhaust connection... i had to grind some more of the universal attachment ring

Now i need to get new oil... canadian tire no longer supports non detergent oil.    Whats everyone using  in canada

4
Listeroid Engines / Re: Advice on exhaust pipe connection
« on: January 09, 2024, 12:56:17 AM »
I tried that with a piece from home depot.
Ended up taking off the cast piece and using a exhaust manifold part fron canadian tire.   Careful i had to grinfd off some width as it was pusing against the rod.

5
Listeroid Engines / Re: decompression parts needed
« on: October 31, 2023, 11:05:40 PM »
Sent a couple of emails.   Need your addy to send the money order too

6
Listeroid Engines / Re: decompression parts needed
« on: October 22, 2023, 04:46:45 PM »
Or better yet.   Trapperjohn1441@hotmail.com  or gank.davies@gmail.com

7
Listeroid Engines / Re: decompression parts needed
« on: October 21, 2023, 02:59:04 PM »
Great. Email me a quote and payment pland
 And ill send the cash and my contact info

Great 👍
Andrew.gank@gmail.com

8
Listeroid Engines / Re: decompression parts needed
« on: October 21, 2023, 01:51:21 AM »
Here are the parts mucked up
The part goin into the motor has a broken bolt
 

9
Listeroid Engines / Re: decompression parts needed
« on: October 19, 2023, 10:53:18 PM »
the lady said he died... glad to hear he moved

10
Listeroid Engines / Re: decompression parts needed
« on: October 18, 2023, 05:05:54 PM »
Damn, just droe out to Johns place, it was quiet, no lister running....

sound out he died 8 years ago, got rid of all his listers.

been away too long

11
Listeroid Engines / Re: decompression parts needed
« on: October 18, 2023, 02:34:08 AM »
  I am looking for the Lister CS & JP Exhaust Valve Guide, Threaded and the nut that screws into it and holds the push rod

12
Listeroid Engines / Re: decompression parts needed
« on: October 17, 2023, 11:10:28 PM »
 O i have that part.   The lifter fits into the top of a machined bold the scews into the decompression valave

The part u identified is the part the holds the parts i need to stop compression

13
Listeroid Engines / decompression parts needed
« on: October 17, 2023, 12:25:32 AM »
So my decompression holder is not working, and yes I can get new ones but for the past 10 years I have just placed a wrench under the same place as the decompression holder.

Make a long story short the nut broke sending the nut off and the compression push rod off and me to my knees.

looks like I will need to get the part that goes into the motor as the nut is broken off half way in, seems there is a site selling them for 15 dollars, but I cannot seem to find the cap that the push rod sits on

Anyone know of a source?

Thanks Andrew in Ottawa

14
Listeroid Engines / Re: Manual For Listeroid 10/1
« on: October 17, 2023, 12:18:22 AM »
I run a radiator out of a Dodge Majic Wagon... no pump, but I blow a fan across it.   been doing so for about 13 years

15
General Discussion / Re: Merry Christmas everyone!
« on: December 26, 2018, 12:20:55 AM »
Merry Christmas All

Pages: [1] 2 3 ... 63