Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - moesoo

Pages: [1]
1
Things I want to Buy / Re: pulley for output shaft of lister ac1
« on: July 22, 2013, 09:06:00 PM »
got a pulley here in us.  thanks moese

2
Things I want to Buy / Re: pulley for output shaft of lister ac1
« on: July 15, 2013, 02:17:05 AM »
thanks mark for the info again.  yes i have not heard any good things yet about those other diesels.  i can agree with you also about ac1 over 3000rpm lack of economy at times.  i use ear coverings when i have to get close to those listers  when they are running. jer

3
Things I want to Buy / Re: pulley for output shaft of lister ac1
« on: July 14, 2013, 07:30:50 PM »
hi mark:  you are a treasure trove of information.  i will look into the references you gave me. one of my ac1's i purchased my ac1 from a military auction years ago, the other i have in a remote place in the desert. never thought to look to see if shaft diameter off the gear end is same diameter.  seems to be some sort of gear reduction device by the output shaft, however i am not an expert.  thanks for the info.  i do not have a manual for the ac1, so don't know a lot other than to know they run real sweet.  jer  :)

4
Things I want to Buy / Re: pulley for output shaft of lister ac1
« on: July 14, 2013, 04:07:07 AM »
thank you for the brief education mark.  where would one be able to purchase these types of things in the u.s. however, does anyone know offhand the diameter of the output shaft of my old lister ac1, and where to find a pulley to fit?  thanks very much for your help! :D

5
Things I want to Buy / pulley for output shaft of lister ac1
« on: July 13, 2013, 07:10:52 PM »
i have an ac1.  need a small v-belt pulley to mount on output shaft to turn a generator or alternator. orrr-i understand there may be some type of adaptor available that would mount right on the shaft and then directly to generator or alternator. i live in u.s.a. any ideas guys???? thanks much. :o

6
Generators / Re: Lister Petter AC1 to gen head ...
« on: January 16, 2012, 08:09:59 PM »
hi:  jerry here from california.  i have an ac1 that has leads coming from flywheel area.  checked output and to my recollection it put out about 35 volts a/c--don't remember exactly.  is that elec. generation worth pursuing?  believe engine may have been used on an 'arrow board' for directing traffic.  good luck with project.  i am wanting to use one coupled with a 12v alternator to use as a battery charger.  thanks for your post.

7
Things I want to Buy / starter wanted ac1 12volt
« on: August 14, 2011, 08:29:39 PM »
hi been a long time since i have been here.  according to the rebuild guy, i blew up my old starter.  i need another starter for it. think its an SL270 working or not if it is rebuildable.  thanks moesoo.  home phone # 858 279-6086--please leave message or just email.

8
i'll answer my own question.  motor oil and methanol do not mix, form 2 separate layers.  now back to the rabbit, any more results with the waste motor oil and the rabbit?  moesoo diesel about 4.65/gal in san diego ca.

9
Everything else / Re: fullers earth and bread filter
« on: May 08, 2008, 03:28:11 AM »
 :)  gee:  thanks for the quick response.  i was wondering how the bread would be used.  guess i'll go ahead and try it one day, although i don't have any of the raw materials now. ;)  thanks again moesoo (jer)

10
Everything else / fullers earth and bread filter
« on: May 07, 2008, 04:12:25 AM »
i read somewhere on the forum about using a filter for some types of diesel made up of fullers earth and bread i think.  anyone ::) know how to make a filter like this.  looking for some do it yourself ideas.  thanks much moesoo (jer)

11
Waste Motor Oil / Re: Blended Waste Oil
« on: April 17, 2008, 02:24:34 AM »
yea thanks.  just after i shut the computer down it came to me!!!  guess besides needing the rug for my missing head hair, i need some of those memory jogger pills.  jer

12
Waste Motor Oil / Re: Blended Waste Oil
« on: April 16, 2008, 03:27:36 AM »
please indulge this old newbie.  what is RUG?  i know i could use one on top of my head because my hair keeps leaving, but what is it really?  thanks jer

13
Waste Motor Oil / Re: blended waste motor oil results
« on: April 15, 2008, 04:17:49 AM »
thanks diesel dave.  yes methanol is methyl alcohol or wood alcohol, but didn't know about it not mixing.  moesoo (jer)

14
Waste Motor Oil / Re: blended waste motor oil results
« on: April 07, 2008, 11:38:00 PM »
anyone tried mixing filtered waste motor oil with methanol (racing fuel)?  problems with combustion??  problems with complete mixing??, etc??  thanks moesoo.

15
anyone out there have any ideas about mixing methanol (racing fuel) with filtered wast motor oil??  any chance of it working?  thanks moesoo

Pages: [1]