Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - selmawp

Pages: [1] 2 3 ... 8
Listeroid Engines / Re: our kiss program for a starter on our 10/1
« on: September 15, 2019, 08:44:46 PM »
Hi, would love to be able help you, but just finished cleaning my shop and don't have enough parts to make one.

Things I want to Buy / valv ceepers
« on: July 20, 2019, 02:29:16 AM »
Any one have any spare valve keepers? As I was assembling the valves on the last one I released my spring tool and one keeper flow in to orbit. Any help very much appreciated. Tony.

Hi Amos, my 2 cents worth, drilling holes in the shield very bad idea,    for 30 years I did rebuild water pumps and have dealt with many brgs  and 99% of the time brgs failed because of contamination, and a couple of drops of oil will contaminate the brg.
shielded brgs are designed to operate on there own lubricant, also shielded brgs will let some oil in, so there for I would recommend using rubber shielded brgs. Tony.       

Original Lister Cs Engines / Re: went fishing and look what took my bait
« on: August 27, 2015, 03:02:28 AM »
Hi 38ac, woow that must of been one juicy worm, you have one left?

Original Lister Cs Engines / Re: A new Lister in the family...
« on: May 20, 2015, 03:16:54 AM »
Hi, for any one who like to know kippen soep means chikken soup.

Changfa Engines / Re: Removing S195 flywheel
« on: July 25, 2014, 05:49:20 AM »
Hi, I have 20 ton 3 finger puller that will do it, if you pay for shipping I will let you use it. Please return in timely manner. Tony.

Original Lister Cs Engines / Re: Lister SR3 piston rings
« on: June 23, 2014, 09:08:29 PM »
Hi, what is the bore size?

Listeroid Engines / valve guides
« on: January 17, 2014, 03:41:08 AM »
Today we discovered something we have not read about before. While doing a new valve job on our 10/1 we needed to replace the valve guides as they were worn out, not having any in stock we robbed some off Tony's 14/1 as they were the same size. After having installed them, and were finished with all the machining, we noticed small holes in the old 10/1 guides that are not in the 14/1 guides. Our guess is that the holes
(see the picture)
are for oil to get down into the guides. ANY THOUGHTS OR COMMENTS?

Listeroid Engines / Re: Seasons greeting to all members
« on: December 20, 2013, 02:29:20 AM »
Merry Christmas around here. The happy holidays people can  jam their political  correctness  up their exhaust pipe

My thoughts also, it is sad that it has gone this far, :'( :'(

Listeroid Engines / Re: Seasons greeting to all members
« on: December 19, 2013, 05:20:26 AM »
 How about some thing different, how many different languish do we have on this blog wishing eats other Marry Christmas, so here go's the first one in Dutch
Zalig Kersfeest en Gelukkig Niew Jaar.

Pages: [1] 2 3 ... 8