Puppeteer

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - sanchez

Pages: [1] 2 3 4
1
sorry mcgyver for the motion, the purpose is to ilustrate all the view angles, remember, the men fall in love with they can view, as much detailed videos more listeroid's fans can you atract.

3
Listeroid Engines / Re: Power Anand (powerline) or JKSON or ?
« on: April 10, 2008, 04:37:55 PM »
Craig,

I have a lovson, the engine came totally clean, perfectly balanced and as proof, is working at the dominican republuic with an average of 4 hours daily. the sand and imperfections is real, but some brand take more care than others. you can see my listeroid at you tube.

good luck.

4
Listeroid Engines / Re: Pictures of my trailer
« on: February 10, 2008, 12:49:24 AM »
congratulations for an impresive job, very professional.

5
Listeroid Engines / Re: need to flash generator often??
« on: February 04, 2008, 06:28:12 PM »
hi,

the first thing to do when you have a remain loss is to check the insulation resistance, to do so, you will need a megohmeter. the problem looks like a current filtration from the rotor winding to earth, the filtration drain the exitation current and avoid the exitation shunt buid-up, if you don't have the megger, you can use a 110 volts lamp instead.

with the lamp: take the brushes off, connect a potential 110 Volts to the slip ring one lamp socket lead to neutral and touch the rotor shaft with the other lamp socket lead, you are connectin the lamp in series with the generator insulation, if the lamp turn on (even dimmed) the insulation have a filtration and may be produced by moisture, is easy to fix it, heating the generator in an oven to 110 celsius degrees per 3 hours and check again.

6
Listeroid Engines / Re: the listeroid legacy will continue....
« on: January 11, 2008, 10:28:42 PM »
yes, that is true, including the sons to our hobbies, we reinforce the relation and increase the confidence between father and sons. This days, the street is too hard and agressive, this hobby can help with the comunication.

7
Listeroid Engines / the listeroid legacy will continue....
« on: January 11, 2008, 09:22:24 PM »
my daughter just began to read and write and is presenting a notable  aptitude to the mechanic, the hack-mechanic, I am glad to use this excuse to share quality time at home with her.

                                                             

8
Listeroid Engines / Re: engine knock review.
« on: January 11, 2008, 08:55:58 PM »
great to ear so, but a rod inspection is easy, better I'll do to be sure.

9
Listeroid Engines / Re: My wife says I look like a dork!
« on: January 11, 2008, 02:34:41 PM »
Hi,

that is a beautiful starter set, compact and robust, could you post detailled pictures for me, I want to built a similar for the mine, My wife will love that starter.

10
Listeroid Engines / Re: engine knock review.
« on: January 11, 2008, 02:30:20 PM »
thanks guys,

I will check the engine the next week, this weekend is the birthday party of mu daugther. but answering, the engine rotate by hand smoothtly and you do not feel any contact or friction. I don't know now if  the engine have a real problem, let me explain, with the engine started and under load, I cut the fuel rack off, the sound disapear, them, quickly I release the rack and the engine revolutions raise (breaking the inertia) with a heavy injection steram, black smoke and all the other...., during the engine recovering, the sounds increase proportianally to the overinjection, when the engine stabilize, the sound is regular. I think that the knock is normal in the DI engines, what all you think?

11
Listeroid Engines / Re: engine knock review.
« on: January 10, 2008, 06:34:20 PM »
jens, that sound some mystical, but any  the way, I will have the chickens near while I work in the engine...... ;D ;D ;D

12
Listeroid Engines / engine knock review.
« on: January 10, 2008, 03:31:39 PM »
hi, After listen opinions about my engiene sound, I took tis footage with the microphone covered with a finger (to ear only the hammer noise, is confirmed, this engine is knocking too loud. Today or tomorrow I'll remove the cover to inspect the crankshaft bearings and rod bush and bearing. The results will be posted, for now apreciate the sound in the video.http://youtube.com/watch?v=zeBlxjL5dT8

13
Listeroid Engines / Re: the genset for the day to day Use.
« on: January 10, 2008, 02:41:47 PM »
HI GUYS,

I will check the rod bearing clearance with plasticgage, I think that the noice is product of the bad microphone gain, but follow a partner's advice don't hurt absolutely.

sincerelly thanks. 

14
Listeroid Engines / Re: Diesel knock
« on: January 08, 2008, 03:09:55 PM »
Hi guys,

I am the owner of the lovson that jens saw at the bananas garden, My engine is direct injection (no changeover valve), the little knock that you can ear is normal under high load, as the mine is. can you post a audio-video footage

15
Listeroid Engines / Re: the genset for the day to day Use.
« on: January 03, 2008, 08:22:38 PM »
My location is Santo Domingo, you are invited to visit my country again, this is a really nice place lo vacationing, and I souldn't say this, the dominican women are very generous with the stranger....

Pages: [1] 2 3 4