Hello All,

        I sell Listeroids and I have a suggestion for setting up your cooling system. The problem I've found with installing small automotive radiators is bleeding the air bubbles. Many of my customers have complained about overheating this way and simply "grown" their cooling systems for big $$$. Bigger radiators, more coolant etc.  I have found that the old NASCAR trick of feeding the engine coolant output into the bottom or the radiator works wonders. The bubbles automatically purge out the top. With the conventional plumbing of in the top and out the bottom on my 10/1 demo unit and the 180F thermostat stayed open, the electric fan never started and the recovery tank started over heating. But reverse the flow and the thermostat never opened releasing only the bleed volume through the closed thermostat. The fan started on a 50% duty cycle and the temp stayed at about 160F. Same load just different heat management.

Best
Graham Slieker

Hi All,

    If anyone is looking for a new Listeroid for On or Off Grid power production I can provide them. Things seem to be getting a little "exciting" with the power grid and in general in our country, so I'm seeing an increased interest in Listeroids. I have a few 10/1's left in inventory now and will have other sizes in the near term. They are available as either a prime mover or with a brush-less alternator kit. These can be seen on my WEBsite  http://www.boltonpowerequip.com  If anyone is interested or just has questions, drop me a note or reply with a post.

Best
Graham
Bolton Power Equipment

Hello All,

        We're ramping up importing new Listeroids configured as compressors. These will have all available upgrades including bronze idler gears, water pumps, thermostats and Bendix gear starters. We will be offering custom steel "C" channel frames and ST or Stanford power heads with control boxes, if requested. We are located in Massachusetts in the US. We will deliver locally in New England and drop ship anywhere else in the US. We are looking at the next load for delivery in mid-July this year. This forum is active with folks looking for Listeroids so I thought I'd post and see if any forum participants are interested in ordering from the next load?  http://www.boltonpowerequip.com  Please feel free to post here or drop us a note on the Website.

Best
Graham
Bolton Power Equipment