Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - schoust

Pages: [1] 2 3 4
Generators / Re: sell power back to utility
« on: January 09, 2008, 03:24:38 PM »
  Hey Scott any progress yet? I'm waiting for you to change my mind on the sale of my engine and generator.......... ;)

Listeroid Engines / Re: Offset Idler Bolt Feedback
« on: March 23, 2007, 04:39:24 PM »
Xyzer, would my Powerline !2-1 benifit from such an offset? I am about ready to start a l0ong run and want to be equiped as best as possible...

Listeroid Engines / 12-1 Thermostat #'s
« on: February 24, 2007, 08:56:31 PM »
      Guy's I'm looking at putting a thermostat in my 12-1 Listeroid made by Power Annan (Powerline) I was wondering if any of you guy's have the of the shelf model numbers??

Listeroid Engines / Oil pump issues??
« on: January 21, 2007, 09:57:57 PM »
 Ok Guy's I have started to prep my Ananon 12-1 for starting I filled the crank case with oil and went to prime the oil pump via the hand pump and could not get it to move?? Has anyone had this problem with there pump?? I'm thinking maybe it has some sort of bur in the cylinder thats causing the pisten to hang up??

Lister Based Generators / Themosiphone Limits
« on: January 11, 2007, 01:18:52 PM »
   Ok Guy's I have been thinking about how I'm going to set up my Listeroid gen set cooling loop and what I have come up with Is a couple of unit heaters with electric fans that were being demoed out on a job I am on so what I was thinking I would hang one in the garage and one in a space where i could dump heat,my question is what are the limitations On the height that this type of cooling will work? At what point will a pump need to be used???

  Thats is a very good question that I have asked also,I ended up with quite an assortment of spares,the price was right!! ;)

Listeroid Engines / Re: Mounting an engine-----
« on: July 07, 2006, 03:05:51 PM »
   Hey guy's has anyone tried to mount a Listeroid to one of those large blocks that they use to block areas of constuction off??I'm thinking that may be a way to go,but is it heavy enough??

    I had to make the same desission and went with Anan, what came down to is I liked the way he treated a couple of members here on the boards and so far I have heard nothing bad about his Listeroids.We will soon see when I get my machine......

General Discussion / Re: Auto or Manual transfer switches
« on: May 19, 2006, 08:28:05 PM »
  These are my exact worry's this might be able to be done with relays it depends what your Utility wants ,there are those out there that run a simple magnetic starter and get away with it.I believe mine in Ct. is looking for somthing like this Beckworth box.As far as it being here in 40 years thats laughable,I do believe it has a five year limited warenty though...

General Discussion / Re: Auto or Manual transfer switches
« on: May 19, 2006, 12:43:55 PM »
I am interested in the other set and I would also like a filter setup could you give me a total shipped to 06751?  Thanks Ralph

General Discussion / Re: Auto or Manual transfer switches
« on: May 18, 2006, 07:59:37 PM »
  Hey Pigseye I am more than Likly going with the Beckworth Box I only threw my 2 cents in Just in case you were not going to take them,I could not resist I love old stuff like that...

General Discussion / Re: Auto or Manual transfer switches
« on: May 18, 2006, 12:57:11 PM »
      If no one wants them Mike I'll take them....

General Discussion / Re: Auto or Manual transfer switches
« on: May 13, 2006, 01:03:12 AM »
    Yes sir it's looking more and more like the do it all Beckworth Black Box,I was hoping this was not the case but it seems the utility gets what it wants.The thing that puzzles me is how could one state say that a simple mag.starter will be good and another wants complete overkill :-\

Listeroid Engines / Re: Unground Muffler design
« on: May 11, 2006, 08:14:05 PM »
       Thanks Hotater and anyone else,I just put a sump in my Factory Firebird tank,I must have washed it out a dozen times,When I started to weld on it I was crapping my pants LOL!!

Listeroid Engines / Re: Unground Muffler design
« on: May 11, 2006, 05:35:01 PM »
Thanks Jim thats somwhat what I'm looking for and it just so happens I have one of those tanks that I have to get rid of the only thing is do I have to worry about cutting on one of these things it did have propane in it at one time.....

Pages: [1] 2 3 4