looks like that bearing was put on to tight and not shimmed .

Hi, I have a 6-1 lister and having trouble with my voltage. the voltage is producing 70 volts and not sure what to check or how to adjust the voltage. I took ever wire and connector out and cleaned the connections one by one making sure not to put any thing in the wrong spot and made sure every wire was tight in the control box and is still putting out 70 volts. there is a component in the box that looka like you can adjust it. it a spool of wire about 3 inches long with a band over it with wires attached. not sure if that's the part that need adjusting .i will try to ad pics tks

I have a startomatic 6-1 lister and it is putting out 75 volts on the plug in the off grid cottage. not sure what to check for in the control box. hope some of you guys can help direct me in the right direction. tell me what the readings are for some components and sorry to ask maybe someone may have a picture or link of the components, thanks so much.

 Looked at the pulley on the 6-1 startomatic generator and there is no metal to take down on the pulley  to make it smaller, to remove the pulley is there a set screw there somewhere or just pull it of and is the outside weight pulley separate from the inside belt pulley so I can match something smaller to get the rpms up on the generator.  the generator is putting out 70 volts and if you turn the engine up the generator is putting out 90 volts and the lights will brighten up. don,t like doing that as I am afraid something may let go in the engine when the engine is cold, there may be something else going on in the control box or generator, maybe someone may have an idea. thanks so much.

 I have a 6-1 startomatic and live in Canada, the generator is producing 50 hertz but the appliances here are 60 hertzs, I pluged in my tv and smoked that and is not working any more. Is there anything I can do to change the output from 50 to 60 hertzs.  Thanks.

 On the hub before the flywheel on both sides there a screw on top of the hub. Is this for oiling or just oiling on a rebuild. I change the oil regularly but was wondering if I have to add oil to this location and is there any other areas for oiling . I know you have to grease the cam and the bearings on the generator on both sides, Thanks.

ok understanding but how will you hook up the avr. maybe in the out put leaving the generator and would you use an electronic model or an old fashion manual operating model as in a car. and what model is best to use and best way to set up. thanks.