Puppeteer

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Bent Trigger

Pages: [1] 2 3 ... 12
1
Lister Based Generators / Re: 1925 Lister 2T and Generator
« on: June 06, 2026, 11:58:43 PM »
https://photos.app.goo.gl/fAaGvAc5DGcpk6g4A

Finally getting back to  the Last of this. I Hope!
Life is flinging towards the future!
I have to add a couple Mount to the rear of this Frame for the Radiator and there will be a Jack Shaft in the back to spin the RPM magneto. And the batteries will be above the Generator. Not the best position but will work for Me!
I did it like this so nothing would be on the original bed, although the fuel tank will be on a board under the inboard Generator Bearing.
Thanks For Watching!
Chris

2
Sorry I can't help you with what you're looking for information-wise but pictures help a lot if you think it's magnetism and slap a couple of magnets on the outside of it the bigger the magnet the better start it and see if anything pops up on the voltmeters Good luck
Happy New Year

3
Lister Based Generators / Re: 1925 Lister 2T and Generator
« on: December 25, 2025, 04:53:52 AM »
Merry Christmas to All!!
May God Bless You In All Your Ventures!!

4
Lister Based Generators / Re: 1925 Lister 2T and Generator
« on: December 22, 2025, 02:23:56 AM »
So I have been working on other projects and will soon be attempting to get a control panel together to finish this project. I cannot find an original control so I will be doing my best to make something that will hopefully be a reasonable facsimile. It will certainly not be as Elegant as the Original!!
See Ya in the Spring!
And
Merry Christmas!!
https://photos.app.goo.gl/bj3GTW4aPSgzjWKE6

7
Lister Based Generators / Re: 1925 Lister 2T and Generator
« on: September 30, 2025, 11:42:19 AM »
https://photos.app.goo.gl/H9yCu7tcRLrsj39a9
Working on the speedo
I calculated it to 100-1
So I bought a cheap Chinese 3 planetary reducer
Hope it works until I find something ancient.
Keith I'll get a clearer Pic of that bender MFG Sorry.
[/quote
I said 100-1- should be 25-1 or there abouts 
I must have been thinking of my 1800rpm gens dang!!

8
Lister Based Generators / Re: 1925 Lister 2T and Generator
« on: September 21, 2025, 08:50:34 PM »
https://photos.app.goo.gl/kEWzAezHqxRkds6T6
Hey go Keith it's a holesclaw who knew I got a bigger one too

9
Lister Based Generators / Re: 1925 Lister 2T and Generator
« on: September 21, 2025, 12:44:29 PM »
https://photos.app.goo.gl/H9yCu7tcRLrsj39a9
Working on the speedo
I calculated it to 100-1
So I bought a cheap Chinese 3 planetary reducer
Hope it works until I find something ancient.
Keith I'll get a clearer Pic of that bender MFG Sorry.

10
Lister Based Generators / Re: 1925 Lister 2T and Generator
« on: September 20, 2025, 11:02:16 PM »
Here ya go Keith
I got it at a garage sale a long time ago and this is my first use of it  worked great.
https://photos.app.goo.gl/s2eH5CVdeMu1aVts9

11
Lister Based Generators / Re: 1925 Lister 2T and Generator
« on: September 14, 2025, 10:58:21 PM »
Oil filter working
Had to prime the system
Making voltage
Need to add an muffler
https://photos.app.goo.gl/q13BND8rr93Cj57v5

14
Lister Based Generators / Re: 1925 Lister 2T and Generator
« on: September 05, 2025, 01:48:38 AM »
https://photos.app.goo.gl/WyVUxUh3zxWSAQ5PA
Finally got the Oil Filter Bracket Made

15
Lister Based Generators / Re: 1925 Lister 2T and Generator
« on: August 30, 2025, 11:17:08 PM »
Cleaned up the pcs and shortened the snoot as I thought it might be bottoming out in the elbow.then blasted and jb weld both pcs liberally. And back in the vice for a 48hr cure.
When i clean it back up I'll add a couple tint screws to help hold it forever. Got to get this finished  to run the engine!!

Pages: [1] 2 3 ... 12