Show Posts
1
Generators / Statomatic 4.5kva pulley/flywheel removal.
« on: October 26, 2023, 06:02:06 AM »
Hi all,
I'd like to remove the pully/flywheel from my 4.5kva startomatic alternator (to attempt to straighten the shaft). Having trouble ID'in the threads for the jacking bolts. Roughly 12mm diameter and a very coarse thread. Also can't see any other retaining devices other than the set screw above the keyway that I have already removed. Is it now just a case of jacking the pully off with the jacking bolts? Ny idea if it is an interference fit on the shaft?
Cheers,
I'd like to remove the pully/flywheel from my 4.5kva startomatic alternator (to attempt to straighten the shaft). Having trouble ID'in the threads for the jacking bolts. Roughly 12mm diameter and a very coarse thread. Also can't see any other retaining devices other than the set screw above the keyway that I have already removed. Is it now just a case of jacking the pully off with the jacking bolts? Ny idea if it is an interference fit on the shaft?
Cheers,