Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - lister-deaf

Pages: [1]
1
Lister Based Generators / Re: Harbor Freight 7200W Gen head
« on: April 26, 2006, 06:09:33 PM »
HarborFrieght's Assembly and Operation instructions
click this
http://www.harborfreight.com/manuals/45000-45999/45416.pdf

what size do i need two puilleys for my 14/1,000 rpm 20 inches wheel or large pulley and pulley for generator head 3,600 rpm)?


2
Listeroid Engines / Re: The Centramatic wheel balancer????
« on: April 23, 2006, 11:46:30 PM »
  ??? We hashed this out a short while ago - I talked to the Centramatic folks about it, apparently it will not work because the balancers rely on the "flat spot" at the bottom of the tire as it rotates to function.  However, they did suggest another product, a damper system.  I was about to follow up on this but "other stuff" got in the way so it's on hold for a while.  The other thing was that there were some excellent suggestions under "balancing out the bounce" that suggested much cheaper ways of doing it - the dampers would cost about $200 an engine.

because the their movie showed the tire isn't on road or suface and just  air running . They put weight block ( red magent)  on rim cause hop hop then they put centramatic on rim with weight block (red Magnet) and showed smooth balancer " AIR RUNNING "without on road or surface. 
 http://www.centramatic.com/Demo/video2.mpg :'(

3
Listeroid Engines / The Centramatic wheel balancer????
« on: April 23, 2006, 04:06:03 AM »
Do you think the Centramatic Wheel Balancers (SVU or light truck with five holes)  will help our lister to smooth  with homemade five hole and hole szie adapter fit our lister flywheel shaft?  Will they work??




http://www.centramatic.com/Demo/video2.mpg

visit centramatic.com

4
Listeroid Engines / Re: Balancing out the Bounce---
« on: April 23, 2006, 04:01:59 AM »
Do you think the Centramatic Wheel Balancers (SVU or light truck with five holes)  will help our lister to smooth  with homemade five hold adapter for centralmatic wheel balancers and fit our lister flywheel shaft?



http://www.centramatic.com/Demo/video2.mpg

visit centramatic.com

5
General Discussion / Re: Balancing your engine
« on: April 23, 2006, 02:52:38 AM »
Do you think  The Centralmatic  will help our lister engine to smooth with their either suv or semi size put on Lister Flywheel?
let me know it would work????? ::)

http://www.centramatic.com/Demo/video2.mpg

Visit   http://www.centramatic.com/index.html

6
General Discussion / Re: Auto or Manual transfer switches
« on: April 22, 2006, 02:33:20 AM »
Semi-Automatic - If you have a manual start generator this unit is for you. The semi-automatic comes with the same voltage monitoring and safety equipment as the automatic but does not come with ability to start the generator.

Automatic - If you have an auto-start generator this transfer switch is for you. The automatic comes with the ability to start the generator, monitor voltage, communication capability, and the same excellent safety features.

http://electromn.com/pdf/LI124.pdf

7
Listeroid Engines / Brand Listeriod c clone
« on: April 21, 2006, 03:34:51 PM »
what brand  do you own 14/1 ?  how much do your 14/1 work with Generator KWATT?

 ::)

8
Listeroid Engines / Re: How is your 14/1 running so far?
« on: April 21, 2006, 03:29:42 PM »
which brand 14/1 engine is very good reiliable? ::)

Fieldmarhal?

Loversn?

Agahwa.....?

what brand do you own 14/1? ::)





9
Listeroid Engines / 6/1 with 5kw
« on: April 20, 2006, 04:09:59 PM »
[oes 6/1 with 5kw will work with central A/C ( my central a/c label say 14.7 amp and .5 amp motor fan)?
 ???

10
Listeroid Engines / Re: Gen.head size
« on: April 19, 2006, 02:47:43 AM »
Hi SCHOUST,
How long do you own 14/1 running? did you buy 10Kw gen ?
thank you
Terry ::)

11
Listeroid Engines / Re: How is your 14/1 running so far?
« on: April 19, 2006, 02:29:17 AM »
please help me to decide buy 12/2 or 14/1?  I wonder 14/1 good runs? ???
thank you

12
Listeroid Engines / How is your 14/1 running so far?
« on: April 18, 2006, 10:51:45 PM »
I am hardly to decide buy either 12/2 or 14/1 becasue i need almost 8kw running?  I don't care sound.

Pages: [1]