1
Listeroid Engines / Re: Leader 8-1 rebuild epoxy question.
« on: November 15, 2021, 12:05:21 AM »
Thank you guys for the heads up, much appreciated.
Tailwheel.
Tailwheel.
Home of the Listeroid - Since 2005
News:
Don't forget to check out the LEF Gallery! Exclusively for LEF members, an ideal alternative to Photobucket, Flickr, etc. It's FREE, and best of all totally AD FREE! Just click the link!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Listeroid Engines / Leader 8-1 rebuild epoxy question.
« on: November 14, 2021, 09:59:52 AM »
Have this 8-1 bulk stripped ready for rebuild, and asking what type of epoxy we should paint the crankcase internals with? The casting is usual Rajkot cast, extremely poor, and we believe it was leaking oil through the crankcase, and need to reseal it.
Thanks all, Tailwheel.
Thanks all, Tailwheel.
3
Lister Market Place (things for Sale) / Re: Lister 26-2 skid mounted with Mono water pump EOI
« on: November 07, 2021, 01:38:57 AM »Hi guys, first post from us in the west.
EOI for a 26-2 original Lister HB skid mounted with a Mono pump attached via a viscous drive. Located in WA.
Motor turns over freely, but inlet and exhaust manifolds are off it but included. SN:819HB218
EDIT, This is in Western Australia, [WA] Sorry for the confusion guys.
4
Lister Market Place (things for Sale) / Lister 26-2 skid mounted with Mono water pump EOI
« on: August 16, 2021, 08:57:30 AM »
Hi guys, first post from us in the west.
EOI for a 26-2 original Lister HB skid mounted with a Mono pump attached via a viscous drive. Located in WA.
Motor turns over freely, but inlet and exhaust manifolds are off it but included. SN:819HB218
EOI for a 26-2 original Lister HB skid mounted with a Mono pump attached via a viscous drive. Located in WA.
Motor turns over freely, but inlet and exhaust manifolds are off it but included. SN:819HB218
Pages: [1]